Info on imported sc400 engine's with 50,000 miles
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2017
Location: Nevada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Info on imported sc400 engine's with 50,000 miles
So my sc400 has a blown gasket and I'm thinking it'll be cheaper if I just swap my blown engine for ones of those imported engines from Japan with less then 50,000 miles on it. Has any one ever installed one of these imported engines and worked perfectly fine and ran without any problems?? If so do I just install the new imported engine and put all the new fluids in and I'll be good???? !!!Someone help please!!!
#3
Lexus Champion
iTrader: (10)
might be easier if it doesnt have issues as gerrb said. fluids, tbelt, seals and waterpump at least.
or just replace the head if necessary and the headgasket if its just one side. good chance the block is fine.
just make sure to get a fully loaded head with cams and caps etc.. dont mix and match.
or just replace the head if necessary and the headgasket if its just one side. good chance the block is fine.
just make sure to get a fully loaded head with cams and caps etc.. dont mix and match.
Thread
Thread Starter
Forum
Replies
Last Post