primary wire to pasenger coil NO Voltage..help
Thread Starter
Lead Lap
Joined: Mar 2006
Posts: 434
Likes: 0
From: OR
primary wire to pasenger coil NO Voltage..help
Hello all,
I thought I had a coil problem but after both coils checked out, I went to check the harness side to see if I was getting power. Drivers side primary at 11.2mV and secondary at 2.1mV Passengers side 2.0mV secondary and 0.0pmV primary. Where to go from here? What does it go through before getting to the coil, I need to trace it back from the coil, but don't want to tear the intake plug covers etc. Anybody got a wiring diagram they can send my way. Any help much appreciated.
Thank you,
Ryan.
1992 SC400
I thought I had a coil problem but after both coils checked out, I went to check the harness side to see if I was getting power. Drivers side primary at 11.2mV and secondary at 2.1mV Passengers side 2.0mV secondary and 0.0pmV primary. Where to go from here? What does it go through before getting to the coil, I need to trace it back from the coil, but don't want to tear the intake plug covers etc. Anybody got a wiring diagram they can send my way. Any help much appreciated.
Thank you,
Ryan.
1992 SC400
Thread
Thread Starter
Forum
Replies
Last Post
kreativ
ES - 1st to 6th Gen (1990-2018)
9
Dec 17, 2018 02:34 AM
lastmohcnz
GS - 2nd Gen (1998-2005)
0
Apr 6, 2017 01:30 PM