I have a few detailed questions about my swap. I am currently doing the 1JZ swap and getting ready to build my power steering lines. I have deleted the intercooler for the rack already that is normally on the driver side by the bumper, so this is not in the loop, just the power steering rack, pump, and resevoir with lines.

My question is this the correct way to run the lines as shown below? Dont be laughing about my 5 minute drawing. If so, how long should the line in picture be cut to approx? I was thinking around 2 feet or so. That picture is from DM website. I will have to buy the correct fittings, but I want assure 100% the lines first. I cant find nothing on this at all.

I need some guidance on this...

 

That looks right. I think the dm line is longer than 2 feet. I just put one on my car and it worked great.

 

Anyway you can measure it, maybe three feet? It didn't look that long in the picture. Thanks for any help. Need this puzzle behind me!

 

I put that line on my sc300 as well it worked like a charm. I think its sligtly too long but it works just like it should.

 

The factory SC400 OEM power steering line worked for me like a champ. My build thread in signature shows the route I chose with the vacuum line hook ups.. Thanks for the replies.