Notices
SC - 1st Gen (1992-2000)

Sc300 1jz vvti project help needed!!!!

Thread Tools
 
Search this Thread
 
Old Nov 22, 2011 | 06:25 PM
  #1  
Kenzoku's Avatar
Kenzoku
Thread Starter
Driver School Candidate
 
Joined: Sep 2008
Posts: 43
Likes: 0
From: Ca
Default Sc300 1jz vvti project help needed!!!!

Hey there CL so what my situation is right now I have the motor in and just received the harness back from Dr Tweak and hooked everything up but now lookin at the power fuse box i dont have power to the (Fuses are not melted)
-Starter
-Heater/Radio
-Fuel pump
-Tail lights
-Side markers
if anyone have any idea's I will be most appreciated thanks
Reply
Old Nov 23, 2011 | 02:00 AM
  #2  
shima's Avatar
shima
Driver School Candidate
 
Joined: Jul 2011
Posts: 46
Likes: 0
From: UK
Default

Easiest way would be to grab a multi meter and check where the power stops. just follow the wires back
Reply
Old Nov 23, 2011 | 06:20 AM
  #3  
vangb2's Avatar
vangb2
Pole Position
iTrader: (2)
 
Joined: Jul 2009
Posts: 216
Likes: 0
From: MN
Default

you should have 2 cables that hooks up to the positive side. I bet you only have 1 cable going to the starter and the other one is hidden somewhere in your engine bay. but anyway, the fuse box has a nut that holds the 2nd cable that connects directly to the battery.

1 cable going the starter
1 cable going directly to fuse box. There is a nut there that holds it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SOLID300
GS - 2nd Gen (1998-2005)
3
Nov 1, 2017 04:57 PM
flektone
IS - 2nd Gen (2006-2013)
17
Nov 7, 2014 01:00 PM
flektone
IS - 2nd Gen (2006-2013)
5
Apr 17, 2012 12:20 PM
ratkowp51
SC - 1st Gen (1992-2000)
5
Apr 18, 2010 08:51 PM
ScSlide
SC - 1st Gen (1992-2000)
22
Jan 9, 2009 11:21 PM




All times are GMT -7. The time now is 07:42 PM.