When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Curious to know if someone has changed out the RPM needle before by themselves? That's the only one giving me an issue...for now
if you're talking about the needles itself and not the motor than yes i have done it before. all i did was pulled it straight out and push the new one back on.
if you're talking about the needles itself and not the motor than yes i have done it before. all i did was pulled it straight out and push the new one back on.
Was the one you pulled out losing light? When you replaced it did it illuminate correctly again?
I didnt watch the entire video, but you dont have to take all those back screws off to access just the needles. Just the 5 on top and the three on the bottom to remove the front lense cover. Maybe I should have watched the entire video, someone correct me if I am wrong. This is what I have done to mine, and it still works great. I have had 2 needles burn out form Lextech and they have fixed them and returned, no questions asked.
