What did you do to your SC today?
#7232
Instructor
iTrader: (1)
its a special puddy like substance used for repairing leather cracks in furniture. Works pretty well, ive considered using it on mine but im not sure how well it would work on perforated seats. You apply it to the crack as smooth as you can, wait for it to dry and lightly 'sand' it with a scotch pad. then use leather dye/paint and you get the final result.
#7233
refinish. used a filler. after lots of research on leather fillers (and their high cost) i found numerous threads online about using a certain type of DAP for the filler. Soooo i decided why not- i picked up these extra seats. prepped the surface, used the filler, prepped again and followed up with SEM toyota ivory. I put SEM down on my current seats last summer and its holding up fantastically.
SEM 17293 Ivory Classic Coat
Dap 18285 Dynaflex 230
SEM 17293 Ivory Classic Coat
Dap 18285 Dynaflex 230
The following 2 users liked this post by logix7:
RudysSC (03-29-18),
tsmith1315 (03-30-18)
#7234
Lead Lap
iTrader: (8)
refinish. used a filler. after lots of research on leather fillers (and their high cost) i found numerous threads online about using a certain type of DAP for the filler. Soooo i decided why not- i picked up these extra seats. prepped the surface, used the filler, prepped again and followed up with SEM toyota ivory. I put SEM down on my current seats last summer and its holding up fantastically.
SEM 17293 Ivory Classic Coat
Dap 18285 Dynaflex 230
SEM 17293 Ivory Classic Coat
Dap 18285 Dynaflex 230
#7235
Pole Position
They came out excellent, nice work! And thank you for the info.
#7237
logix7, that's a very good-looking job. Special thanks for the details on the materials you used.
My passenger seat needs a bit of attention, so I plan on going this route with it.
Does anybody know if SEM has a color for the contrasting brown on the door panels? I'm hoping to start a stereo install this summer,
and matching the colors on any fabricated parts would be a necessity.
-Tim
My passenger seat needs a bit of attention, so I plan on going this route with it.
Does anybody know if SEM has a color for the contrasting brown on the door panels? I'm hoping to start a stereo install this summer,
and matching the colors on any fabricated parts would be a necessity.
-Tim
#7240
logix7, that's a very good-looking job. Special thanks for the details on the materials you used.
My passenger seat needs a bit of attention, so I plan on going this route with it.
Does anybody know if SEM has a color for the contrasting brown on the door panels? I'm hoping to start a stereo install this summer,
and matching the colors on any fabricated parts would be a necessity.
-Tim
My passenger seat needs a bit of attention, so I plan on going this route with it.
Does anybody know if SEM has a color for the contrasting brown on the door panels? I'm hoping to start a stereo install this summer,
and matching the colors on any fabricated parts would be a necessity.
-Tim
i used less than one can. should be enough left to do my console arm rest as well. the last time i did 2 seats i used about 1.5 cans. they run about 16-17 dollars on amazon. and they were 15 and some change at a local paint supply shop.
#7241
Driver School Candidate
iTrader: (1)
Changed the color on trim see how it would look.
Change color on emblem like this metalic red toyota color.
Replaced ac controller
And passenger window regulator and motor. Thanks to 100mgbluep .
Last edited by Dabiskit; 04-03-18 at 08:23 PM. Reason: Forgot something
#7242
Driver School Candidate
Its been a little while since I have been on...
Figs front lca's
Duel 2.5" stainless exhaust the whole way
door hinges
Tein flex z coil overs
New climate control unit
Timing, front and rear main seals
also replaced the sunroof
put in an Injen intake
new tailights
Just ordered Figs solid rack busings
plus a ton of other things i cant think of right now.
The following users liked this post:
Dabiskit (04-05-18)
#7244
Pole Position
Figs front lca's
Duel 2.5" stainless exhaust the whole way
door hinges
Tein flex z coil overs
New climate control unit
Timing, front and rear main seals
also replaced the sunroof
put in an Injen intake
new tailights
Just ordered Figs solid rack busings
plus a ton of other things i cant think of right now.