mounted my rear bumper last night...
https://cimg3.ibsrv.net/gimg/www.clu...79a774c9db.jpg
https://cimg3.ibsrv.net/gimg/www.clu...e1e3a57eac.jpg
https://cimg4.ibsrv.net/gimg/www.clu...a5f86dc100.jpg
https://cimg5.ibsrv.net/gimg/www.clu...160688d93b.jpg

Looking really tough man!

Struts and Bushings!
 

Replaced my front struts, removed all my LCA & UCA bushings in prep for new ones, replaced my Rack & Pinion bushings. Declared FAILURE on the rear struts. (yes, it has humbling..) My electric impact wrench could not reach the brake bolts, so will have someone else with a lift and better tools take care of those.

This suspension blog is extremely helpful. This is WAY better than burning the whole bushing out.
https://www.suspension.com/blog/how-...the-right-way/

The UCA bushings came out by themselves (didn't even need to push) and they popped out in about 5 minutes each (because the Aluminum is such a better heat conductor than the steel)

Like that styling! Body kit and exhaust are all superb.

refurbished HKS Coilovers installed :)


https://cimg4.ibsrv.net/gimg/www.clu...06381799ae.jpg
https://cimg6.ibsrv.net/gimg/www.clu...3cd71a4e00.jpg

Replacing my driver's side window regulator and installing a *cabin* air filter hopefully.

https://cimg1.ibsrv.net/gimg/www.clu...68d26fd49.jpeg
Pulled my motor out again... stopped getting spark after breaker bar made contact with the battery during timing.

I made more tire stickers. Now each tire has 2​​​​​​​
https://cimg8.ibsrv.net/gimg/www.clu...85de59c93.jpeg
https://cimg5.ibsrv.net/gimg/www.clu...19b0040e8.jpeg

Finished the install of my new Treadstone turbo manifold.

https://cimg7.ibsrv.net/gimg/www.clu...35c3e31ad3.jpg

https://cimg5.ibsrv.net/gimg/www.clu...ee899b91a4.png

got some new Johnnys on the car, 17x9 MB Battles, got the driver side of the interior done with the seat mount welded in. next up is all the maintenance, change all the fluids, change O2 sensors and so on. After that it's ready for the tranny swap.
https://cimg3.ibsrv.net/gimg/www.clu...c159d4cea6.jpg
https://cimg4.ibsrv.net/gimg/www.clu...c2174fefae.jpg
https://cimg2.ibsrv.net/gimg/www.clu...c42827fa62.jpg

tackled some maint, now that its not my daily

water pump, cam seals, crank seal, drive belt tensioner pulley bearing, upper/lower radiator hoses.


piece of cake

https://cimg6.ibsrv.net/gimg/www.clu...eb949b4762.jpg
https://cimg9.ibsrv.net/gimg/www.clu...1be3005479.jpg
https://cimg0.ibsrv.net/gimg/www.clu...9bf750d56d.jpg
https://cimg1.ibsrv.net/gimg/www.clu...e78fb0e758.jpg

Testing for leaks before I put everything back together.

https://cimg3.ibsrv.net/gimg/www.clu...f54be52c4.jpeg
5 gallon tank, 3/8” hoses and fittings, 2 compressors

That’s a pretty sweet setup man.