Its real simple. Remove both control arms and tie rod from hub. Remove the brake caliper and bracket and rotors. Send it in

 

is this 175 a piece or for both sides?

 

I would be down for this. I also have an extra set of knuckles sitting around that I could send you to get this started. I could send those to you. Let you do work, then send out the others to get the ball rolling on this. I know of a few members on here who would be up to this.

 

im down like a clown charlie brown!! im not satisfied with my spacers

 

too true -see below


that's not a bad idea, I may not get around to it for a little while since my SC's not here.

$175 would cover both

LOL! cool, tie rod spacers don't do much... PM me when your ready.


-I've already got a set with and without bearings made here so, I can charge a core of say $150 + $175 for the knuckles and once I receive a good set of knuckles back from you I'll refund your deposit.

Or you can send me yours and I'll turn them back around within 2-3 Business days, (plus shipping time) I can press bearings in/out but that would be extra. They're a PITA to hold in the press.

If your hubs have bad bearings I can press in new ones or find you good used hubs with bearings, if you send me hubs with trashed bearings or cracks I won't be able to refund your deposit.

every set will be crack checked.

-bump steer is noticeably reduced
-the feeling of a locked up wheel at full lock is nearly gone
-this is the third generation on this mod, I've been working on this chassis since early 2007 so I'm not some random welder with a new idea.

I'll wait to see how many people are seriously ready do do this before I become a sponsor. (so far looks great!)

BTW I will have vouches from at least 3 members who have had extensive work done by me in the past. one represents a shop that I've done a lot of business with. Plus my trader feedback is 100%

 

id be down for getting this done. i wouldnt mind getting rid of some bump steer.