Finally.....Dyno
#1
Finally.....Dyno
Well after a year of waiting and parts breaking......I got a chance to get my car to the dyno. I tuned it on the street just never had any numbers. Best numbers were 463whp with 385ftlbs @ 22.5 psi. Tuned on a safc2 with rx7 550s and factory fuel pump.... Next time bigger pump, and regulator and a few more psi. Should make 500 no problem....
Setting up
http://www.youtube.com/watch?v=d4DGe3fXO3U
This pull I had a hard time shifting and doing a video....Its hard to see on this pull I made 458 and 378
http://www.youtube.com/watch?v=0NLYHZ_QORY
This was 444whp with 375
http://www.youtube.com/watch?v=5ZKYu7Bh75w
Setting up
http://www.youtube.com/watch?v=d4DGe3fXO3U
This pull I had a hard time shifting and doing a video....Its hard to see on this pull I made 458 and 378
http://www.youtube.com/watch?v=0NLYHZ_QORY
This was 444whp with 375
http://www.youtube.com/watch?v=5ZKYu7Bh75w
Trending Topics
#10
Thanks guys... as far as the tune goes the power and torque are pretty smooth. I tried keeping the air fuel around 11.7-11.8. It did get a little lean around 6000up. I believe the stock fuel pump is the culprit. Overall I'm happy I just wanted 400 to the wheels with pump. Now I know I can shoot for 500 on 93 and ill be fine. I will try to get some of the graphs up when I get a chance.
#14
Thanks guys... as far as the tune goes the power and torque are pretty smooth. I tried keeping the air fuel around 11.7-11.8. It did get a little lean around 6000up. I believe the stock fuel pump is the culprit. Overall I'm happy I just wanted 400 to the wheels with pump. Now I know I can shoot for 500 on 93 and ill be fine. I will try to get some of the graphs up when I get a chance.