1siksc

iTrader: (8)

Today is gonna be a huge build day, me and a friend took my car over to another friends house via tow straps(that was fun). Day one there we only had a few hours so we started planning the exhaust, cut a hole for the th350/ hurst shifter linkage. Yesterday, I got alot more parts for the trans cooler. SO I am hoping today it will be ready to drive except just not having a driveshaft

1siksc

iTrader: (8)

Here is from last week Sunday.

1siksc

iTrader: (8)

Hopefully driving the car home next week.
Photos of stuff done today




Back to stock body.



length of driveshaft

1siksc

iTrader: (8)

Stuff to Do
finish exhaust
call about driveshaft order
run trans lines and get a 75 angle
wire radiator fans and trans cooler
get fluids
bolt trans linkage to trans
sheet metal trans linkage
sheet metal spare tire well
bolt up turbo IC side
Get ECU Back, borrowed it to someone
adjust shift linkage
Get wideband flange

t70 supra

iTrader: (-4)

looking good

1siksc

iTrader: (8)

finally got some more pics of progress.
On my friends lift.

UnderPressureMotorsports.com, currently down.



Hurst th350 Linkage

Spare Tire Well gone for exhaust fitting.

HKS Super Drager tips to big for Body kit so kitless.

Greddy GREX Trans/Oil Cooler, being used for the th350 Trans with the B&M Super Cooler Fan, my cooler broke from them.

IC Piping Stage 1, Stage 2 it gets Vbanded.




Ignor my friends dad in the background, they are huge muscle car guys. Awesome fitment with the super Drager, had to torch and bend the muffler mount and had to reweld the catback Super Drager Pipe's hanger in a new location.

Vbanded the super drager, driveshaft still being planned, waiting on a part.

Trans lines running, tight fit had to pound the crap out of the tunnel, th350 dust cover.

Sheet Metaled spare tire hole.

B3A5T!

More to come next week sunday.

1siksc

iTrader: (8)

This sunday
Trans Lines are Finished, th350 is fully Mounted, 4" Exhaust is almost Done, 6" Intake pipe is cut, Driveshaft should be done this week I hope, Radiator Fans Brackets are 90 percent done. Temporary wiring for trans fan and radiator fans is setup, gonna run relay once back home.
I had a shop do some gap filling and flowage along with welding the wideband bung in.

Trans Lines and how I ran them and the Greddy GREX Setup as trans cooler with SPAL fan from my old B&M Super Cooler.

pmpdaddyt

iTrader: (4)

r u gonna run 2 fans?
what r your plans for the driveshaft?

1siksc

iTrader: (8)

Yeah, 2 fans both are 16" Wysco, they are dual ball bearing and reversible, so 1 in front and one in back.
The driveshaft for using a stock toyota diff temporary so it needed a adapter, i got one from DriftMotion it adapts to a 1350 chevy 4 bolt driveshaft. The driveshaft is being made by a local shop.

LexFather

Thanks for the updates

1siksc

iTrader: (8)

btw I never stated that I would be dong part reviews but...the downpipe/ midpipe I have is the 4" one form eBay, XSPower Makes it, it's really cheap like $320ish? Thick Stainless Steel metal, pretapped for stock o2 the bend that it come with are great, the only thing is that it will never just work with you setup, unless if it's the setup XSPower made the plans from but idk who all trust an XSPower turbo and such. The pipe had a 3" to 4" vband adapter on the inlet that was cut off and a 4" vband welded on. THe other vband on it seem to be made right at hier shop and are half a$$ed those were cut off and new ones put on, btw no clamps came with this down/mid pipe setup and if you buy just the clamps it will not work cause of the half a$$ness. Beside that much the bends and pipe quality is great!

96SC4

iTrader: (2)

coming along nicely!

1siksc

iTrader: (8)

Whats Left from today for next week.
-Drill holes for th350 dipstick mount
-Install ECU and cover
-Buy new Dash Temp Sensor
-Drill holes for Trans linkage cover
-Hook up vacuum lines
-order 5.5" and 6 clamps
-Rig up something for temporary oil breather
-Check and Fill all fluids
-Wire fans

pics from today... exhaust completely done.

For those who wanted to see more. 6 Disc cd fuse box

2x 16inch radiator fans and a spal trans cooler fan

not final trans linkage cover.

finished exhaust, will be adding 4" electric cut out in the future

romycha1

iTrader: (3)

Very awesome work! I'm lovin the super drager, I've been looking for a decent used one for my SC.

ClearP

Nice progress! Love how you do all of your own work!