any 400 member please help!!! Need some info before tues.
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2009
Location: az
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
any 400 member please help!!! Need some info before tues.
any of you 400 members out there please help me. so here's the deal i just got my 400 a while back and the car has been running and driving fine but i am driving from phoenix, az to quincy, il next week and i wanted to check all of my fluids before i left but i went to check my trans fluid today and realized there's NO DIPSTICK IN THE TUBE!!!
Anyways my favor is will someone please take just a few minutes and measure your TRANS dipstick from, tip to handle for length, from tip to low mark and tip to full mark.
i am a fabricator by trade and can probably easily make something to get by for now and don't worry, for the moment i have a plug in the tube to keep krud out of the trans.
Anyways my favor is will someone please take just a few minutes and measure your TRANS dipstick from, tip to handle for length, from tip to low mark and tip to full mark.
i am a fabricator by trade and can probably easily make something to get by for now and don't worry, for the moment i have a plug in the tube to keep krud out of the trans.
#4
i had nothing to do so, hope this helps... sorry, i use the metric system..
all measurements are started from the tip of the dipstick..
cool low 9mm, cool high 24.5mm
hot low 52mm, hot high 75.5mm
tip to the cap where it hits the tip of the dipstick "tunnel" 669mm
tip of dip stick to the tip of the handle 721mm
all measurements are started from the tip of the dipstick..
cool low 9mm, cool high 24.5mm
hot low 52mm, hot high 75.5mm
tip to the cap where it hits the tip of the dipstick "tunnel" 669mm
tip of dip stick to the tip of the handle 721mm
Thread
Thread Starter
Forum
Replies
Last Post
darimura
LS - 1st and 2nd Gen (1990-2000)
10
10-31-10 06:41 AM
poicow
LS - 1st and 2nd Gen (1990-2000)
2
11-04-09 11:09 PM