When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
well got everything bolted up, but gonna need to get some wiring issues figured out... IE starter and reverse light =\ starter shouldnt be a problem...but reverse ftl... allen chime in plz? =)
well got everything bolted up, but gonna need to get some wiring issues figured out... IE starter and reverse light =\ starter shouldnt be a problem...but reverse ftl... allen chime in plz? =)
Reverse light.. you cut two wires from one of the harnesses on the auto tranny harness and re-connect them to the two wires on the W58 tranny. I'll try to find a pic for u
well got everything bolted up, but gonna need to get some wiring issues figured out... IE starter and reverse light =\ starter shouldnt be a problem...but reverse ftl... allen chime in plz? =)
what do you need to wire for the starter? On the large plug that originally plugged into the auto tranny you shoudl find two pins that are a bit larger than the rest. Just shove a small fuse in there. By doing this, the ECU will think the car is in neutral, and you'll be able to start it right up
The starter is the same for auto vs manual tranny. Positive, negative, and solenoid wires are all the same as well. Let me know if u need help. I could take some pics if necessary too.
