Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#5911
Pole Position
Hello,
I'm trying to get some rims and the ones I like have the following specs:
18x9 +35 offset and all around.
I do not like my wheels sticking out past the fenders. I actually prefer my wheels sunken in so I can drop the car low and tuck the wheels in the fender. Do you think this setup would work?
I'm trying to get some rims and the ones I like have the following specs:
18x9 +35 offset and all around.
I do not like my wheels sticking out past the fenders. I actually prefer my wheels sunken in so I can drop the car low and tuck the wheels in the fender. Do you think this setup would work?
#5919
Lexus Test Driver
iTrader: (1)
finally a pic, 18x10 +35 all around advan tc3. 265/35f 285/35r ( was going to do full square with 285's in the front too but they hit the liners at full lock and probably more when turning and hitting a bump. they sit right at the fender maybe 2-3mm past in the rear and 5mm in the front as the front fender kind of comes back in toward the center of the car. but imo they fit perfect for me i forgot my alignment specs but basically very little camber.. not a huge fan of massive camber, this is also why i have wheel gap (around 2 fingers ), the rear squats pretty hard under accel.
#5921
Lead Lap
iTrader: (8)
That's not a blue lip, it's protective tape since those wheels are brand new. They can't be relipped because the wheels aren't 3 piece it looks like a 2 piece welded wheel.
You can fit some pretty large tire sizes on those. If you don't want them, and they're in socal. I'll go buy them tomorrow. lol
You can fit some pretty large tire sizes on those. If you don't want them, and they're in socal. I'll go buy them tomorrow. lol
The following users liked this post:
VINCE9164 (08-18-17)
#5922
Driver School Candidate
Hey guys, have a question about fitment. I'm looking to get a set of Enkei Raijin's for my SC300. planning on doing 18x8.5 for the front and 18x9.5 for the rear. My concern is what offset to go with either +35 or +15 are my options for the rear. Also what tires sizes to run. Any input would be great, thanks!
#5923
Driver School Candidate
***WILL THEY FIT?***
Cosmis XT-206R Wheels
18x9.5 +10 offset? (tough to tell from the pic)
Tires Size 235/40/18
Looking to pick these wheels up today, just want to verify that they will fit without any extensive modifications. Thanks!
Cosmis XT-206R Wheels
18x9.5 +10 offset? (tough to tell from the pic)
Tires Size 235/40/18
Looking to pick these wheels up today, just want to verify that they will fit without any extensive modifications. Thanks!
#5925
Driver School Candidate