Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#5673
?
DID you ever get this set up? Searching the threads this is closest thing i found to what I'm trying to run currently. If u have any pics that'd be great.
#5674
Lexus Test Driver
iTrader: (1)
18x11.5 +43 and 18x11.5 +47
My car has vertex rear over fenders, stock front fenders
Has roll and pull.
Im more concerned if these wheels will interfere with my suspension components without spacers.. stupid high offsets and width.
My car has vertex rear over fenders, stock front fenders
Has roll and pull.
Im more concerned if these wheels will interfere with my suspension components without spacers.. stupid high offsets and width.
Last edited by Deegee; 03-20-16 at 10:45 PM.
#5676
Lead Lap
iTrader: (8)
I'm not sure about suspension clearance in the front. I can't think of any cars that have wheels that wide in the front. If the wheels are 3 piece, then you could probably find the inner barrels used and swap them out to make a narrower wheel while maintaining the same lip on the outside.
#5677
Lexus Test Driver
iTrader: (1)
The rears will be ok with coilovers (some hammering might be involved). I think it could potentially hit a spring and shock combo or air suspension.
I'm not sure about suspension clearance in the front. I can't think of any cars that have wheels that wide in the front. If the wheels are 3 piece, then you could probably find the inner barrels used and swap them out to make a narrower wheel while maintaining the same lip on the outside.
I'm not sure about suspension clearance in the front. I can't think of any cars that have wheels that wide in the front. If the wheels are 3 piece, then you could probably find the inner barrels used and swap them out to make a narrower wheel while maintaining the same lip on the outside.
More importantly, what tire size should I go with on these??
#5678
CL Member Name: Sunny416
Rim Brand and Type: Kranze Cerebus 3
Rim Size f/r: 18x10.5 18x11.5
Rim Offset f/r: +18 and +13
Tire Size f/r: 225/35 and 245/35
Suspension Setup: Megan Street (Fortune auto awaiting install )
Comment On Ride: Soft
Fender Modifications: All 4 are Rolled and Pulled
Any other comments: Must remove harness (just do it. dont think twice about it)
Picture:
Rim Brand and Type: Kranze Cerebus 3
Rim Size f/r: 18x10.5 18x11.5
Rim Offset f/r: +18 and +13
Tire Size f/r: 225/35 and 245/35
Suspension Setup: Megan Street (Fortune auto awaiting install )
Comment On Ride: Soft
Fender Modifications: All 4 are Rolled and Pulled
Any other comments: Must remove harness (just do it. dont think twice about it)
Picture:
Last edited by sunny416; 03-23-16 at 09:33 PM.
The following users liked this post:
rishard97 (07-29-19)
#5679
Hows this set up?
Trying to figure out if this set up will be a good one. Ive found a craigslist guy selling Euro Mag Wheels ( Any experience with this brand feel free to tell me) and potenza tires from his mustang. He's running 275/40 tires on 19x9.5 +40 Em10 wheels all the way around. Will this be sunken in
? and if so what spacer would I need for a flushed look my car will be lowered 2-3inches soon so if there would any interference with suspension components please let me know but I truly doubt there would. If anyones got any similar set ups post pics please. Haven't found this exact set up yet in the forums but still looking.
? and if so what spacer would I need for a flushed look my car will be lowered 2-3inches soon so if there would any interference with suspension components please let me know but I truly doubt there would. If anyones got any similar set ups post pics please. Haven't found this exact set up yet in the forums but still looking.
#5680
Lead Lap
iTrader: (8)
Your offsets are still very conservative for a wide body car. I think your wheels might even fit a stock body car with rolled fenders, stretched tires, and some camber. It's hard to say what size tire to run since I've never tried working with a 11.5. I would need to see the car and do measurements for myself before deciding. If I had to guess I would say start around a 255 or 265 width in the front and as wide as you want in the rear.
#5681
Quick question guys.
SC400
Front: 18x9 ET20 with 225/40/18
Rear: 18x10 ET38 with 255/35/18
Will they fit without having to roll the arches?
I'm on slight drop on coilovers.
Thanks
SC400
Front: 18x9 ET20 with 225/40/18
Rear: 18x10 ET38 with 255/35/18
Will they fit without having to roll the arches?
I'm on slight drop on coilovers.
Thanks
#5684