Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#5284
Driver School Candidate
iTrader: (2)
Wire harness relocate
Fresh Set...still at the shop doing a driver side wire harness relocate....any help or tips on how to do so would b much appreciated.
AllStar Black Chromium SP5ive
245/40/18x9 +25 offset rolled and shaved
275/35/18x10 +25 offset rolled & shaved
AllStar Black Chromium SP5ive
245/40/18x9 +25 offset rolled and shaved
275/35/18x10 +25 offset rolled & shaved
#5285
Pole Position
i set my eyes on some rims who only are available in the same figures that you have , how is the rubbing? can you run on normal camber ?
i am about to roll my fenders flat
#5287
Driver School Candidate
iTrader: (2)
Thanks! I'm on normal camber just the way I wanted, I love it! Depends if your dropped or not. I'm on Megan coils and I had to bring it up 3/4 of an inch to be safe n I'm more than pleased except for the fact that I had to remove my front splash guards completely bc it was rubbing still so they aren't on anymore. It left my fog lights bare naked with no protection for moisture to get in and burn my HID bulbs and GUESS what happened...not even one day n they were out. CANT WIN! That's what u get when u mess with the splash guards. I have to figure it out otherwise it's gonna be a chronic issue.
#5290
Driver School Candidate
Need help!
I have some extremely aggressive wheels 18x10 -0 front and 18x11 -0 rear.
I'm running 255/35 in rear, and a 225/35 in the front
here are the pics, I have ARP extended studs for an IS300 and I plan to run a 3mm spacer to clear LS460 calipers.
here's the pics of the fitment (rx8 trolling in the back.)
Will this work?
I'm running 255/35 in rear, and a 225/35 in the front
here are the pics, I have ARP extended studs for an IS300 and I plan to run a 3mm spacer to clear LS460 calipers.
here's the pics of the fitment (rx8 trolling in the back.)
Will this work?
#5294
Driver School Candidate
All right awesome guys thanks for the help, I may run a 235/40 to help out in the rear. Now time find a fender roller I will repost the set-up upon completion. Thanks again much appreciated.
#5295
Pole Position
iTrader: (1)
Before I look into buying these wheels a friend of mine is selling for dirt cheap the specs are rears are 19 x9.5 tires are 275/30/19 offset 32 front are 19x8.5 tires 235/35/19 offset 36. Does anyone know if this will involve rolling the fenders. or if the wheels will have that sunken look to them To be honest right now I have stock suspension but plan on buying coil overs soon.
Any help would be greatly appreciated
Any help would be greatly appreciated
Last edited by Supremeg56; 05-31-14 at 10:40 PM.