Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#5101
Pole Position
iTrader: (6)
I tried searching but its well over 300pages lol. i thinking about picking up a set of Varrosteon ES3 specs are 18x8.5+22 and 18x9.5 +30 will these 1 clear ls400 brakes and 2 be flush. Im rolling on tein coils right now. also what size tire should i run. Im not into that stretch tire look because where i live the roads are horrible lol.
#5103
live.love.laugh.lexus
iTrader: (42)
I tried searching but its well over 300pages lol. i thinking about picking up a set of Varrosteon ES3 specs are 18x8.5+22 and 18x9.5 +30 will these 1 clear ls400 brakes and 2 be flush. Im rolling on tein coils right now. also what size tire should i run. Im not into that stretch tire look because where i live the roads are horrible lol.
#5106
Driver School Candidate
Join Date: Dec 2013
Location: OK
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Planning on running XXR 531 CCW reps
on STOCK suspension
18x9.5 +20
245 or 255
Guessing a minor roll will be fine
18x11 +20 with 275/35/18 (street tire) or 285/40/18 (DOT drag)
Guessing fenders will need to be rolled flat and slightly pulled
Can the rears be run without extra camber?
on STOCK suspension
18x9.5 +20
245 or 255
Guessing a minor roll will be fine
18x11 +20 with 275/35/18 (street tire) or 285/40/18 (DOT drag)
Guessing fenders will need to be rolled flat and slightly pulled
Can the rears be run without extra camber?
#5107
Lexus Test Driver
Planning on running XXR 531 CCW reps
on STOCK suspension
18x9.5 +20
245 or 255
Guessing a minor roll will be fine
18x11 +20 with 275/35/18 (street tire) or 285/40/18 (DOT drag)
Guessing fenders will need to be rolled flat and slightly pulled
Can the rears be run without extra camber?
on STOCK suspension
18x9.5 +20
245 or 255
Guessing a minor roll will be fine
18x11 +20 with 275/35/18 (street tire) or 285/40/18 (DOT drag)
Guessing fenders will need to be rolled flat and slightly pulled
Can the rears be run without extra camber?
#5108
Driver School Candidate
Join Date: Dec 2013
Location: OK
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I just downsized the wheels after going through this F**** 300+ page thread
18x8.5 +20 F
18x9.5 +20 R
square 255/45/18 which puts me a 26in tire height which is close to the stock 25.7 tire height.
Just decided to daily some cheap tires until i boost it
Eff pulling those double wall fenders
#5109
Lexus Test Driver
Thnx for the advice!
I just downsized the wheels after going through this F**** 300+ page thread
18x8.5 +20 F
18x9.5 +20 R
square 255/45/18 which puts me a 26in tire height which is close to the stock 25.7 tire height.
Just decided to daily some cheap tires until i boost it
Eff pulling those double wall fenders
I just downsized the wheels after going through this F**** 300+ page thread
18x8.5 +20 F
18x9.5 +20 R
square 255/45/18 which puts me a 26in tire height which is close to the stock 25.7 tire height.
Just decided to daily some cheap tires until i boost it
Eff pulling those double wall fenders
#5111
Driver School Candidate
Join Date: Dec 2013
Location: Fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys. I'm new to club Lexus forums. I got a sandstone lexus sc300 on 19x9.5 front. 19x10.5 rear. Front tires are 255/40. Rear tires are 275/40. I got axis super hiro rims. My problem is that I got my fenders professionally cut and I still get some rubbing In the back (just a little) and my front I get a lot of rubbing when Turning. What tire size should I go with.
#5112
Driver School Candidate
Artboyyy11
Rim Brand and Type: Saleen Reps
Rim Size f/r: 18x9 18x10
Rim Offset f/r: top picture 30 WITH 15 mm spacers bottom: NO SPACERS
Tire Size f/r: 235/45/18 245/45/18
Suspension Setup: Espelir ASD Tokico blue
Comment On Ride: Slightly stiffer than stock. Love it.
Fender Modifications: Slightly rolled all around
Any other comments: No rubbing
Picture:
Read more: https://www.clublexus.com/forums/sc-...#ixzz2pCVNYJ6K
Rim Brand and Type: Saleen Reps
Rim Size f/r: 18x9 18x10
Rim Offset f/r: top picture 30 WITH 15 mm spacers bottom: NO SPACERS
Tire Size f/r: 235/45/18 245/45/18
Suspension Setup: Espelir ASD Tokico blue
Comment On Ride: Slightly stiffer than stock. Love it.
Fender Modifications: Slightly rolled all around
Any other comments: No rubbing
Picture:
Read more: https://www.clublexus.com/forums/sc-...#ixzz2pCVNYJ6K
#5115
Super Moderator
iTrader: (34)
Since you are not into stretched tires or what and you want 295 tires , with those 10.5" +22 , you will need a good pull and fender roll. Just like you said , the rim alone is already more than an inch out and the 295 tire will still budge a little bit further out. You know, I had those 10" +22 with 275 on the RM1 and I had to do that work on the quarter panels since they were out an inch . Now they are more than an inch inside with over 50mm pull with fender roll. I can fit in 335 or 325 easily.