Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#4456
rpf1's installed yesterday! Nowhere near done working on the fitment, still need to: knock out some of the camber, roll the fenders more, change ride height, and finally get an alignment.
#4459
Driver School Candidate
Join Date: Oct 2012
Location: on
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
eurolines
picking up an sc400 in the next little bit and i got a set of euroline hd and was wondering how you guys think they would fit and look
18 /8 +35 2354018
18/9 +35 2454018
and was thinking about selling these and picking up a different set
any ideas ?
looking at doing fender flairs as well to widen out the car got a fiberglass guy i know that is gonna start making them for me any ideas let me know and fender mods and what not
18 /8 +35 2354018
18/9 +35 2454018
and was thinking about selling these and picking up a different set
any ideas ?
looking at doing fender flairs as well to widen out the car got a fiberglass guy i know that is gonna start making them for me any ideas let me know and fender mods and what not
#4460
Lexus Test Driver
iTrader: (7)
picking up an sc400 in the next little bit and i got a set of euroline hd and was wondering how you guys think they would fit and look
18 /8 +35 2354018
18/9 +35 2454018
and was thinking about selling these and picking up a different set
any ideas ?
looking at doing fender flairs as well to widen out the car got a fiberglass guy i know that is gonna start making them for me any ideas let me know and fender mods and what not
18 /8 +35 2354018
18/9 +35 2454018
and was thinking about selling these and picking up a different set
any ideas ?
looking at doing fender flairs as well to widen out the car got a fiberglass guy i know that is gonna start making them for me any ideas let me know and fender mods and what not
10 char
#4461
Driver School Candidate
Join Date: Oct 2012
Location: on
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Not all that worried about Clarence I am gonna cut out the rear fenders and put fender flairs looking more for what people think and what good spacer sizes work for these things to e flush and to hang never really done an sc before I was more of a Honda / Nissan guy but switching to Lexus
#4462
Lexus Champion
iTrader: (12)
Join Date: Jan 2009
Location: NY
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
imo if ur going to go through all that body work i would get some way more aggressive wheels or barrel the eurolines . you could run 25+mm spacers on those and just roll the fenders flat and no need for flairs
#4463
Driver School Candidate
Join Date: Oct 2012
Location: NE
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I'm picking up a 1992 SC 300 tomorrow and found a set of wheels/rims on Craig's list that I want to buy. The wheels are 245/35/20 on 20in rims. Please tell me they will fit without any modification to the car. Thanks!
#4464
Lead Lap
iTrader: (2)
Join Date: Jun 2011
Location: Charleston, SC
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
What's the width of the rim? What's the offset? This is the information you need to figure out to see if they will fit your car.
Also, unless you're on bags, 20's are to big for an SC, IMO. It'll look like a tonka toy.
#4465
Lexus Test Driver
iTrader: (7)
PROVIDED THAT: the width and offset are right. If not then:
"they will not fit without modification to the car."
SOooOoOo - Since this is your first post, please do yourself and us a favor and look through this thread for more information on 20" fitment. Use the SEARCH function. 20's have been discussed here before.
#4466
Driver School Candidate
Join Date: Oct 2012
Location: Georgia
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
I just got some rims that are 18x9.5+12F and 18x10.5+15R with just a simple roll.I am on coilovers about 2in drop from stock.Would tires that are 225/40/18F and 245/40/18R work with a stretch?
Thanks for your help
Thanks for your help
#4468
Driver School Candidate
Join Date: Oct 2012
Location: on
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I want the aggressive flair side the car is long term plan of a track car and I have the eurolines left over from my last car I was thinking about changing the lips to make them 9 in front 10 in rear but I am over it and was thinking about a set of advan 6 spoke kinda over lip and just have it wide and low camber for drifting tho but I want that wide stance
#4469
Lexus Test Driver
iTrader: (7)
I want the aggressive flair side the car is long term plan of a track car and I have the eurolines left over from my last car I was thinking about changing the lips to make them 9 in front 10 in rear but I am over it and was thinking about a set of advan 6 spoke kinda over lip and just have it wide and low camber for drifting tho but I want that wide stance