Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#4384
Intermediate
iTrader: (1)
My setup:
18x9.5 and 18x10.5 et 15 front and rear.
Tires 225/40 and 255/35 respectively.
Just got it aligned today so I have exact camber numbers too. -3 degrees up front and -2.5 in the back.
Ignore the failed safety inspection. My car was ballin too hard for the first place I took it...
Oh and yes the car is extremely dirty. Sorry I'm not sorry. Hopefully that helps though snakehead.
18x9.5 and 18x10.5 et 15 front and rear.
Tires 225/40 and 255/35 respectively.
Just got it aligned today so I have exact camber numbers too. -3 degrees up front and -2.5 in the back.
Ignore the failed safety inspection. My car was ballin too hard for the first place I took it...
Oh and yes the car is extremely dirty. Sorry I'm not sorry. Hopefully that helps though snakehead.
#4388
Driver School Candidate
Join Date: Aug 2012
Location: ill
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
tire fitment
i have a 97 sc300 with stock suspension. i was wondering if anyone knew if 19x9.5 +15 up front and 19x.10.5 +15 in the rear would work or if they would stick out and also if any fender mods would be needed
#4389
Lexus Test Driver
iTrader: (7)
1. Will it work - yes.
2. Will it stick out? On stock suspension, yes, around 1.75 inches.
Photo below was taken with 19x9.5 +18 up front, at stock height. This photo is also in this thread; I suggest you read through the thread because the answers were already posted. Thanks
#4390
Driver School Candidate
Join Date: Aug 2012
Location: ill
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
You get 2 freebies since it's your first post and you're new here:
1. Will it work - yes.
2. Will it stick out? On stock suspension, yes, around 1.75 inches.
Photo below was taken with 19x9.5 +18 up front, at stock height. This photo is also in this thread; I suggest you read through the thread because the answers were already posted. Thanks
1. Will it work - yes.
2. Will it stick out? On stock suspension, yes, around 1.75 inches.
Photo below was taken with 19x9.5 +18 up front, at stock height. This photo is also in this thread; I suggest you read through the thread because the answers were already posted. Thanks
#4392
Driver School Candidate
Join Date: Aug 2012
Location: ill
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts