RaynArt

I need opinion from the aggressive sized guys.

19x9.5-10
19x10.5-10

What tire sizes would you run with this and how much camber?

Right now I have front and rear rolled as much as I could. I can pull the rear slightly some I'm sure. Id just like to get an idea of how things would sit

I personally dont think id have to pull A LOT or anything but i'd like more experienced opinion on this.

CalitriSC

iTrader: (13)

for -10 front and rear yes you would need a very aggressive pull with a good amount of camber.

RaynArt

hmmm.... ok thanks. any thoughts on tire size?

i remember a member here running 18x10 and 18x11 0 all around. and the camber didnt seem too bad, along with his pull. maybe if im ballsy enough ill pull the trigger on these wheels, for now im still shoppin around and doing my taxes

240sxer

Was wondering if someone has pictures of a similar set up or could tell me how it would fit. 19x9.5 »25 19x11 +29 work meisters s1 stock body. Currently has 255\35 and 285/35 on it

slydjunkie

the rims will fit no problem.. but the tire sizes are taller then stock so could run into rubbing in the front just from the height let alone the width of the tires the rears will fit with a roll but again the rubber is too tall

RLJ

So would 18x11 in the rear fit rolling the fender?

RLJ

Hi guys just bought my sc300 , will be doing the 2jz-gte upgrade buying parts as we speak, looking for rims I want a aggressive look but don't know if to go with 18's or 19's any suggestions.

CalitriSC

iTrader: (13)

If your gonna have decent power go with 18s so you can get some meat on there.

RLJ

Thanks, that's what I thought would 18x11 fit in the back with rolled fenders?

slydjunkie

Yes. Very easily. mine are 18x11+24 in the back. Going to add a spacer to snug it ups bit more.

alex425

iTrader: (1)

Anyone have any idea what size adapters I should run on some BMW style 95s? ( 7series wheels)
I'm looking to get pretty flush and some minor poke. And run some 215 tires

240sxer

What size tire do you recommend?

CalitriSC

iTrader: (13)

I think the smallest adapters are 15mm

TTslug

iTrader: (1)

i think these would hot on my 95 white sc300.

18x10
+25 off set
back spacing 6.48

http://www.nlmotoring.com/PhotoDetai...ode=52180148N2
http://www.nlmotoring.com/product-p/52180148n2.htm

thoughts? will i need to roll my fenders? being lowered.

greens14

iTrader: (28)

estimate camber and stretch required to fit my new setup?


19x9 -1
19x10 -14

i'm avoiding a pull but will if i have to ( ill have to pay to have it done professionally and probably paint sooner than later.

im willing to stretch like crazy and use a fair amount of camber ( just not bosozoku camber)


thoughts?