Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#3692
Lexus Champion
iTrader: (13)
Ok i have browsed this thread quite a bit and have not seen (may have missed it) any ppl post up a fitment that i am curious about.
Work VS-XX
20x9.5 et13
20x11 et19
What kind of tire size would you guys reccomend. fenders are rolled already. How much camber? maxed lol? Am i dreaming here?? or doable??
TIA
Work VS-XX
20x9.5 et13
20x11 et19
What kind of tire size would you guys reccomend. fenders are rolled already. How much camber? maxed lol? Am i dreaming here?? or doable??
TIA
#3693
You shouldn't have any issues running that set up if your fenders are already rolled flat. I ran basically those same specs but in 19s. I had 19x9.5 + 12 front and 19x10.5 +19 rear and still had a little room. Also the tires were 225/35 front and 265/30 rear. I have 18x11 +20 rear now and it sits flush. And I think I'm at -3 camber from the drop
Oh and I am on BC coilovers also ..
#3696
Lexus Champion
iTrader: (3)
the tire is a 255/35/19 and ur rear looks super low. how does it ride? can it take a bump?
im running at the moment supra lowering springs and they drop it about 1.8 inches in the back and its super stiff. a bit more than i'd like. just curious since u pretty much have the stance im trying to get.
#3699
I've been reading this thread for 2 weeks straight to try to get an idea of what I'm doing. I'm just start to understand offsets and widths so I just had a quick question for you wheel experts.
I have megans coils in the front and tanabe nf210 / stock struts (lowers about an inch) in the rear and I'm trying to fit these:
front: 19x8.5+25, tires are 235/35/19
rear: 19x10.5+32, tires are 265/30/19
I'm sure I definitely have to roll in the rear but will I have to shave / pull out the fenders a bit too? Also will the front clear my ls400 brakes?
Thanks everyone for your help, this is all kinda confusing. I just don't want to buy the wrong rims and kick myself in the *** afterwards.
I have megans coils in the front and tanabe nf210 / stock struts (lowers about an inch) in the rear and I'm trying to fit these:
front: 19x8.5+25, tires are 235/35/19
rear: 19x10.5+32, tires are 265/30/19
I'm sure I definitely have to roll in the rear but will I have to shave / pull out the fenders a bit too? Also will the front clear my ls400 brakes?
Thanks everyone for your help, this is all kinda confusing. I just don't want to buy the wrong rims and kick myself in the *** afterwards.
#3701
#3703
Driver School Candidate
iTrader: (1)
Join Date: Jul 2011
Location: TX
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys I need some help making my new wheels fit...
A buddy of mine had some 18" BBS LM that fit pretty perfect on his SC. I bought them off him and they don't clear my LS400 brakes I've been looking at getting spacers and extended studs to make it work.
After testing a 1/4" spacer the wheel would still catch on the caliper some.
Y'all think a 12mm or 15mm would do the trick??
A buddy of mine had some 18" BBS LM that fit pretty perfect on his SC. I bought them off him and they don't clear my LS400 brakes I've been looking at getting spacers and extended studs to make it work.
After testing a 1/4" spacer the wheel would still catch on the caliper some.
Y'all think a 12mm or 15mm would do the trick??
#3705
Lexus Champion
iTrader: (13)
Hey guys I need some help making my new wheels fit...
A buddy of mine had some 18" BBS LM that fit pretty perfect on his SC. I bought them off him and they don't clear my LS400 brakes I've been looking at getting spacers and extended studs to make it work.
After testing a 1/4" spacer the wheel would still catch on the caliper some.
Y'all think a 12mm or 15mm would do the trick??
A buddy of mine had some 18" BBS LM that fit pretty perfect on his SC. I bought them off him and they don't clear my LS400 brakes I've been looking at getting spacers and extended studs to make it work.
After testing a 1/4" spacer the wheel would still catch on the caliper some.
Y'all think a 12mm or 15mm would do the trick??