Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#2979
Pole Position
iTrader: (5)
Join Date: Sep 2010
Location: NC
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys im planing on getting some xxr 521 front 18x8.5 +30 rear 18x10 +25 Im runing KYB shocks and tanabe springs. I know I might need some spacer but would I need a roll? What tire size can I use without a roll?
#2984
Lexus Champion
iTrader: (2)
On paper yes, the aspect ratio sounds odd. Once calculated, the sidewalls for the two aspect ratios will be nearly the same.
Front: 40% of 245 (tread width) equates to 3.85" x 2 = 7.7" + 18" (rim diameter) = 25.7" overall diameter.
Rear: 35% of 275 (tread width) equates to 3.78" x 2 = ~7.6" + 18" (rim diameter) = 25.6" overall diameter.
Both of these overall diameters are nearly identical to the OEM spec of 25.7".
You could run a smaller aspect ratio on the front to give you more of the raked look if that's what you're going for. So running the 35% up front would be no problem. The rears need to be as close to the OEM spec (25.7") to calculate the correct speed reading at the speedometer.
Front: 40% of 245 (tread width) equates to 3.85" x 2 = 7.7" + 18" (rim diameter) = 25.7" overall diameter.
Rear: 35% of 275 (tread width) equates to 3.78" x 2 = ~7.6" + 18" (rim diameter) = 25.6" overall diameter.
Both of these overall diameters are nearly identical to the OEM spec of 25.7".
You could run a smaller aspect ratio on the front to give you more of the raked look if that's what you're going for. So running the 35% up front would be no problem. The rears need to be as close to the OEM spec (25.7") to calculate the correct speed reading at the speedometer.
#2985
Pole Position
iTrader: (5)
Join Date: Sep 2010
Location: NC
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
On paper yes, the aspect ratio sounds odd. Once calculated, the sidewalls for the two aspect ratios will be nearly the same.
Front: 40% of 245 (tread width) equates to 3.85" x 2 = 7.7" + 18" (rim diameter) = 25.7" overall diameter.
Rear: 35% of 275 (tread width) equates to 3.78" x 2 = ~7.6" + 18" (rim diameter) = 25.6" overall diameter.
Both of these overall diameters are nearly identical to the OEM spec of 25.7".
You could run a smaller aspect ratio on the front to give you more of the raked look if that's what you're going for. So running the 35% up front would be no problem. The rears need to be as close to the OEM spec (25.7") to calculate the correct speed reading at the speedometer.
Front: 40% of 245 (tread width) equates to 3.85" x 2 = 7.7" + 18" (rim diameter) = 25.7" overall diameter.
Rear: 35% of 275 (tread width) equates to 3.78" x 2 = ~7.6" + 18" (rim diameter) = 25.6" overall diameter.
Both of these overall diameters are nearly identical to the OEM spec of 25.7".
You could run a smaller aspect ratio on the front to give you more of the raked look if that's what you're going for. So running the 35% up front would be no problem. The rears need to be as close to the OEM spec (25.7") to calculate the correct speed reading at the speedometer.
Now if I go with 265 in the rear what would that put me in the front?