Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#2612
Driver School Candidate
Join Date: Jul 2008
Location: T.O
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I'm about to buy my first set of rims for my car soon... the suspension is stock no pulls/rolled..
19x8.5 Front 19x9.5 Rear Offset: +20 FRONT & +25 REAR
What tire sizes should I get?? thanks
These stock 16 need to go lol..
19x8.5 Front 19x9.5 Rear Offset: +20 FRONT & +25 REAR
What tire sizes should I get?? thanks
These stock 16 need to go lol..
#2617
I only have 8.5 up front and run 245/45/18 with a 30offset.
When I turn in to sections that slightly incline, it rubs due to compression. When I had my 38offset no problem though.
Going in a straightline I havent had any issues.
I am with you though, I dont stretch tires and tuck the wheel/tire combo way up in the well.
#2618
I measured my wheels from outside lip to outside lip it comes up 9.5" so this means i have a 8.5 wide wheel right? 225s should only be a slight stretch? I cant really run anything wider in the front atm will a shop even install a stretched tire?
#2619
Lexus Test Driver
iTrader: (8)
Join Date: Sep 2007
Location: Ca
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
19x9.5 +35 front (fender rolled)
19x10.5 +35 rear (fender rolled)
Car is dropped down to a 1 finger gap.
I need tire sizes that fit without stretching. I want the sidewall to be flush with the wheel. Dont wanna hurt expensive rims with a exposed rim.
19x10.5 +35 rear (fender rolled)
Car is dropped down to a 1 finger gap.
I need tire sizes that fit without stretching. I want the sidewall to be flush with the wheel. Dont wanna hurt expensive rims with a exposed rim.
#2621
I'm looking at picking up a set of rims that are 18x8.5 +30 (f) and 18x10 +25.
99 SC3 with stock ride height. Don't plan on lowering my car anytime soon. Will the rims poke out in the rear with this offset or will it be relatively flush with the body? What size tires would work with this set up? Thanks for any help.
99 SC3 with stock ride height. Don't plan on lowering my car anytime soon. Will the rims poke out in the rear with this offset or will it be relatively flush with the body? What size tires would work with this set up? Thanks for any help.
#2622
I'm looking at picking up a set of rims that are 18x8.5 +30 (f) and 18x10 +25.
99 SC3 with stock ride height. Don't plan on lowering my car anytime soon. Will the rims poke out in the rear with this offset or will it be relatively flush with the body? What size tires would work with this set up? Thanks for any help.
99 SC3 with stock ride height. Don't plan on lowering my car anytime soon. Will the rims poke out in the rear with this offset or will it be relatively flush with the body? What size tires would work with this set up? Thanks for any help.
18x8.5 front at +30
18x9.5 rear at +26.5
#2624
Basically almost what I am at. Pretty flush in the rear and close in the front also. I run 245/45/18 in front and 275/35/18 in rear. I am going to go 285/35/18 once the rears go away. I am sitting on Buddy Club Race Spec coilovers with about a finger gap all around.
18x8.5 front at +30
18x9.5 rear at +26.5
18x8.5 front at +30
18x9.5 rear at +26.5
I've always wondered how Super Advans looked on our cars. Your car looks great.
#2625
thank you for the compliments
my rears have been cut to sit out flush
i want to roll the fronts abit and sit the front down just
a tad more