Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#2581
Driver School Candidate
Join Date: May 2009
Location: IN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I am thinking to put a 18" Petrol Throttle on my SC4, but I don't know how to choose the offset for the front and rear so that I can have a deeper lips at the back.
Are there anyone using this rim or know the setting? Also do I have to roll with this setting? It would be great if someone can give me some info. Thanks
Are there anyone using this rim or know the setting? Also do I have to roll with this setting? It would be great if someone can give me some info. Thanks
Last edited by tintin66; 02-16-10 at 11:50 PM.
#2587
Driver
iTrader: (2)
Join Date: Mar 2008
Location: South Carolina
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
VERY VERY AGGRESSIVE FITMENT HERE!
18x10 fronts, 18x11 rears. Tires setup im going with is 265/35/18 fronts and 295-315/30/18 rears. My car is also lowered on TIEN's. Is this to crazy of a setup? I know I will have roll, pull, or even cut the fenders?
These wheels are supra fitment. And are perfectly flush with the supra I purchased the wheels from. Im needing this tire setup as im needing as much rubber as I can get. "Im boosted". This would totally help me a ton! Thanks again guys! I will donate 5 dollars to Haiti relief fund if you help me too! PROMISE!
-Lee
18x10 fronts, 18x11 rears. Tires setup im going with is 265/35/18 fronts and 295-315/30/18 rears. My car is also lowered on TIEN's. Is this to crazy of a setup? I know I will have roll, pull, or even cut the fenders?
These wheels are supra fitment. And are perfectly flush with the supra I purchased the wheels from. Im needing this tire setup as im needing as much rubber as I can get. "Im boosted". This would totally help me a ton! Thanks again guys! I will donate 5 dollars to Haiti relief fund if you help me too! PROMISE!
-Lee
#2589
Moving SC Threads
iTrader: (14)
VERY VERY AGGRESSIVE FITMENT HERE!
18x10 fronts, 18x11 rears. Tires setup im going with is 265/35/18 fronts and 295-315/30/18 rears. My car is also lowered on TIEN's. Is this to crazy of a setup? I know I will have roll, pull, or even cut the fenders?
These wheels are supra fitment. And are perfectly flush with the supra I purchased the wheels from. Im needing this tire setup as im needing as much rubber as I can get. "Im boosted". This would totally help me a ton! Thanks again guys! I will donate 5 dollars to Haiti relief fund if you help me too! PROMISE!
-Lee
18x10 fronts, 18x11 rears. Tires setup im going with is 265/35/18 fronts and 295-315/30/18 rears. My car is also lowered on TIEN's. Is this to crazy of a setup? I know I will have roll, pull, or even cut the fenders?
These wheels are supra fitment. And are perfectly flush with the supra I purchased the wheels from. Im needing this tire setup as im needing as much rubber as I can get. "Im boosted". This would totally help me a ton! Thanks again guys! I will donate 5 dollars to Haiti relief fund if you help me too! PROMISE!
-Lee
in rear, NO camber. I would test fit before the pull. I'm old, I mean old
school & like a lil tuck on my tires. 'Standard Supra' drop AGX w/ Eibach's,
HRE's spec Supra offsets.........12 1/2" of tire a lot of meat.
#2590
Racer
iTrader: (3)
I need advice on tire size...
I don't have coilovers, so I can't lower my car to get rid of wheel gap. My car is on Espelir springs
Here are pics of my previous setup
17x9.5 +15
235/45/17
255/40/17
The new setup will be 18x9.5 +15. I was thinking of going with 225/40 and 245/40, but will these sizes leave noticeable wheel gap? I want to minimize wheel gap as much as I can, since my car is on Espelir springs.
I don't have coilovers, so I can't lower my car to get rid of wheel gap. My car is on Espelir springs
Here are pics of my previous setup
17x9.5 +15
235/45/17
255/40/17
The new setup will be 18x9.5 +15. I was thinking of going with 225/40 and 245/40, but will these sizes leave noticeable wheel gap? I want to minimize wheel gap as much as I can, since my car is on Espelir springs.
#2591
live.love.laugh.lexus
iTrader: (42)
^Check out this tire calculator: http://www.wheelsmaster.com/rt_specs.jsp
245/40/18 is .7" taller than 255/40/17
245/40/18 is .7" taller than 255/40/17
#2592
Moving SC Threads
iTrader: (14)
It will work, thats my set up w/ 315's out back. Flat roll w/ a light pull
in rear, NO camber. I would test fit before the pull. I'm old, I mean old
school & like a lil tuck on my tires. 'Standard Supra' drop AGX w/ Eibach's,
HRE's spec Supra offsets.........12 1/2" of tire a lot of meat.
in rear, NO camber. I would test fit before the pull. I'm old, I mean old
school & like a lil tuck on my tires. 'Standard Supra' drop AGX w/ Eibach's,
HRE's spec Supra offsets.........12 1/2" of tire a lot of meat.
HRE Supra offsets are apparently weak - could never find the
offset #'s on the rims. I'm running 315/30R18 Choke your mama
Advan Sports in the rear. The sidewall is rounded which helps w/
fender pulling. If you are going to run a Drag radial w/ flat sidewall
you will need a pull w/ a flat inner lip roll.
I get the Hella Flush thing for the offsets, but never got the reason
for tire strech. 1 PA pothole & your rims would be junk.
#2593
Driver
iTrader: (2)
Join Date: Mar 2008
Location: South Carolina
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
So as not to post miss information & reply to your PM
HRE Supra offsets are apparently weak - could never find the
offset #'s on the rims. I'm running 315/30R18 Choke your mama
Advan Sports in the rear. The sidewall is rounded which helps w/
fender pulling. If you are going to run a Drag radial w/ flat sidewall
you will need a pull w/ a flat inner lip roll.
I get the Hella Flush thing for the offsets, but never got the reason
for tire strech. 1 PA pothole & your rims would be junk.
HRE Supra offsets are apparently weak - could never find the
offset #'s on the rims. I'm running 315/30R18 Choke your mama
Advan Sports in the rear. The sidewall is rounded which helps w/
fender pulling. If you are going to run a Drag radial w/ flat sidewall
you will need a pull w/ a flat inner lip roll.
I get the Hella Flush thing for the offsets, but never got the reason
for tire strech. 1 PA pothole & your rims would be junk.
-Lee
#2594
Driver
iTrader: (4)
Join Date: Feb 2006
Location: New Jersey
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Maybe someone can help me. Would i need to roll or pull fenders for these sizes and offsets? 18x9+35 18x10+43. I have a 97 SC300, not lowered yet but will be going with eibach pro kit for the supra and koni shocks.