Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
The following users liked this post:
cboog3105 (04-11-22)
#2297
Driver School Candidate
Join Date: Jun 2009
Location: South FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys.
I'm reading through all pages of this topic but was wondering if somebody could tell me if the offset on those wheels will fit the 95 SC.
Sorry about noob question but want to make sure what I'm looking at instead of crying to my pillow after
http://cgi.ebay.com/ebaymotors/19-AX...#ht_3214wt_806
Appreciate in advance
I'm reading through all pages of this topic but was wondering if somebody could tell me if the offset on those wheels will fit the 95 SC.
Sorry about noob question but want to make sure what I'm looking at instead of crying to my pillow after
http://cgi.ebay.com/ebaymotors/19-AX...#ht_3214wt_806
Appreciate in advance
#2298
Maintenance Moderator
iTrader: (2)
Hey guys.
I'm reading through all pages of this topic but was wondering if somebody could tell me if the offset on those wheels will fit the 95 SC.
Sorry about noob question but want to make sure what I'm looking at instead of crying to my pillow after
http://cgi.ebay.com/ebaymotors/19-AX...#ht_3214wt_806
Appreciate in advance
I'm reading through all pages of this topic but was wondering if somebody could tell me if the offset on those wheels will fit the 95 SC.
Sorry about noob question but want to make sure what I'm looking at instead of crying to my pillow after
http://cgi.ebay.com/ebaymotors/19-AX...#ht_3214wt_806
Appreciate in advance
with that offset, you will need slightly stretched tires, rolled fenders, and possibly a little negative camber...
to avoid that, you would need something in the +35 to +40 offset...
#2299
Driver School Candidate
Join Date: Jun 2009
Location: South FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
#2300
Driver
iTrader: (3)
Join Date: Apr 2009
Location: CA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Those Super Hiros are a clean set of wheels!
My question though and I probably missed this some where on this thread, but Im looking at wheels that are 19x10 +20 rears and 19x8.5 +20 fronts with this fit with espilars?
The offset is what worries me the most...
My question though and I probably missed this some where on this thread, but Im looking at wheels that are 19x10 +20 rears and 19x8.5 +20 fronts with this fit with espilars?
The offset is what worries me the most...
#2301
Pole Position
iTrader: (2)
they should fit ok with the those spacers. I already bought them and it will do til i pick up another set of wheels. I'm not real big on spacers myself. My wheels come in weds this week, so i will post pics up later this weekend.
Edit: I also missed this in the very first post in this thread:
Jeremyp111
front: rim size 18x8; offset +38; tire size 245/40/18; no fender modifications
rear: rim size 18x9; offset +38; tire size 265/35/18; no fender modifications
Same wheels I'm getting. From the pics(page 2) it looks pretty good and i might not even need the spacers. tho the tires on the ones i'm getting are smaller.
Last edited by 89MA70; 06-30-09 at 12:01 AM.
#2302
Lexus Champion
iTrader: (1)
I just bought a set of Work Meister S1's for my sc.
18x9.5 +24 front
18x10.5 +24 rear
I currently have a set of HP Design HP5 18x8 and 18x9 with 225/40 and 265/35 tires.
I'm going to swap the tires onto the new wheels but I'm thinking the the 225/40 in the front might be too much of a stretch. I'm on Stance GR+ Pro coilovers. Hopefully I will only have to roll the fenders but I think I may have to do some pulling.
I havent gotten the wheels in yet but I would rather not buy new tires yet.
Here's a pic of my car with the HP5s
18x9.5 +24 front
18x10.5 +24 rear
I currently have a set of HP Design HP5 18x8 and 18x9 with 225/40 and 265/35 tires.
I'm going to swap the tires onto the new wheels but I'm thinking the the 225/40 in the front might be too much of a stretch. I'm on Stance GR+ Pro coilovers. Hopefully I will only have to roll the fenders but I think I may have to do some pulling.
I havent gotten the wheels in yet but I would rather not buy new tires yet.
Here's a pic of my car with the HP5s
#2303
Lexus Test Driver
iTrader: (10)
what size tires should i run on
19x9.5 +40 in the front
19x9.5 +22 in the rear
I am lowered on espelir ASD/ tokico blues with rolled front fenders and shaved rears. i am not aiming for a huge stretch just slight stretch
I was thinking 245/35 all around but just wanted to get some inputs before i do anything. Thanks
19x9.5 +40 in the front
19x9.5 +22 in the rear
I am lowered on espelir ASD/ tokico blues with rolled front fenders and shaved rears. i am not aiming for a huge stretch just slight stretch
I was thinking 245/35 all around but just wanted to get some inputs before i do anything. Thanks
Last edited by DWPsc3; 06-30-09 at 10:27 PM.
#2305
Pole Position
iTrader: (8)
I have 19" Enkei LX-M with 19x8.5 in the front and 19x9.5 in the back with a +44 and +45 offset I believe. I currently have Tokico Blues and I was wondering what springs I should get for a nice drop while maintaining the smooth suspension.
Forgot to mention that I have 235/35 in the front and 245/35 in the back.
Forgot to mention that I have 235/35 in the front and 245/35 in the back.
#2306
Lexus Test Driver
iTrader: (7)
they should fit ok with the those spacers. I already bought them and it will do til i pick up another set of wheels. I'm not real big on spacers myself. My wheels come in weds this week, so i will post pics up later this weekend... From the pics(page 2) it looks pretty good and i might not even need the spacers. tho the tires on the ones i'm getting are smaller.
if you do 225/40 up front, the 245/40 should match up... a 245/35 on 18x9 will have a thinner sidewall compared to a 225/40 on 18x8
#2307
Lexus Test Driver
iTrader: (7)
I just bought a set of Work Meister S1's for my sc.
18x9.5 +24 front
18x10.5 +24 rear
I currently have a set of HP Design HP5 18x8 and 18x9 with 225/40 and 265/35 tires.
I'm going to swap the tires onto the new wheels but I'm thinking the the 225/40 in the front might be too much of a stretch. I'm on Stance GR+ Pro coilovers. Hopefully I will only have to roll the fenders but I think I may have to do some pulling.
18x9.5 +24 front
18x10.5 +24 rear
I currently have a set of HP Design HP5 18x8 and 18x9 with 225/40 and 265/35 tires.
I'm going to swap the tires onto the new wheels but I'm thinking the the 225/40 in the front might be too much of a stretch. I'm on Stance GR+ Pro coilovers. Hopefully I will only have to roll the fenders but I think I may have to do some pulling.
I'm running 235/35 up front on 19x9.5 +24, you can see the mild stretch there. a 225/40 would be about 1/2-inch narrower on width. You'd expose the wheel A LOT but if that's your flavor then ok.
BTW Depending on how low you are on your coilovers, you most likely have to pull all 4 corners, and most definitely have to roll all 4 (had to do all 4 on my car)
Last edited by raine; 07-26-09 at 01:17 PM.
#2308
Lexus Test Driver
iTrader: (7)
I have 19" Enkei LX-M with 19x8.5 in the front and 19x9.5 in the back with a +44 and +45 offset I believe. I currently have Tokico Blues and I was wondering what springs I should get for a nice drop while maintaining the smooth suspension.
Forgot to mention that I have 235/35 in the front and 245/35 in the back.
Forgot to mention that I have 235/35 in the front and 245/35 in the back.