Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#2191
Pole Position
Join Date: Apr 2006
Location: California
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
For reference purposes:
2 rear wheels mounted. Specs: 18x10.5 +16 offset 245/40. Lowered on Megans. Definitely still needs work. If i can find 2 more wheels I'll lower the car more and add camber in the rear, along with going with a 35 series tire, and possibly roll the fender out a little.
2 rear wheels mounted. Specs: 18x10.5 +16 offset 245/40. Lowered on Megans. Definitely still needs work. If i can find 2 more wheels I'll lower the car more and add camber in the rear, along with going with a 35 series tire, and possibly roll the fender out a little.
#2195
Driver
iTrader: (1)
Join Date: Aug 2008
Location: dd
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Ok....
I want a wider stance with what I've got if at all possible.
Tires 245/45/17
Wheels :17x7 +38 offset SSR Integral A2's
Suspension: Tein Flex Dampers
How should I go about doin it?
I want the rims to stick out of the fender a tad... Wheel spacers? Which kind? Stock studs?
I want a wider stance with what I've got if at all possible.
Tires 245/45/17
Wheels :17x7 +38 offset SSR Integral A2's
Suspension: Tein Flex Dampers
How should I go about doin it?
I want the rims to stick out of the fender a tad... Wheel spacers? Which kind? Stock studs?
#2196
Hacked CL to become a Mod
#2198
Pole Position
Join Date: Apr 2006
Location: California
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
marcuse: get the widest spacer you can... maybe 30mm lol
1sickSC: You can roll out your fenders and it will fit. Look at mine a few posts before yours.. your rears would only stick out slightly more and those ALMOST fit lol. But then again I'm running a 245 series tire, you might want to stretch it a little more, or just pull out the fender.
1sickSC: You can roll out your fenders and it will fit. Look at mine a few posts before yours.. your rears would only stick out slightly more and those ALMOST fit lol. But then again I'm running a 245 series tire, you might want to stretch it a little more, or just pull out the fender.
#2199
Pole Position
Join Date: Apr 2006
Location: California
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Oh and kevin: No I still have the sterns. One of them has a small crack thats letting out air and instead of fixing it I bought the Garsons. Only thing is, one of the Garsons never arrived in the mail, so I've only got 3!
#2200
Driver
iTrader: (1)
Join Date: Aug 2008
Location: dd
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
marcuse: get the widest spacer you can... maybe 30mm lol
1sickSC: You can roll out your fenders and it will fit. Look at mine a few posts before yours.. your rears would only stick out slightly more and those ALMOST fit lol. But then again I'm running a 245 series tire, you might want to stretch it a little more, or just pull out the fender.
1sickSC: You can roll out your fenders and it will fit. Look at mine a few posts before yours.. your rears would only stick out slightly more and those ALMOST fit lol. But then again I'm running a 245 series tire, you might want to stretch it a little more, or just pull out the fender.
Where do I find them at and also... any other supporting mods I need to do to use them safely?
#2201
Pole Position
Join Date: Apr 2006
Location: California
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
I've bought some off ebay that have worked pretty well actually. They come with all the studs and bolts so you just bolt em up. I've never had any problems using them, always seemed perfectly safe. You might not actually need 30mm. You should do measurements to see how much you'd want it to stick out.
#2202
Driver
iTrader: (1)
Join Date: Aug 2008
Location: dd
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
I've bought some off ebay that have worked pretty well actually. They come with all the studs and bolts so you just bolt em up. I've never had any problems using them, always seemed perfectly safe. You might not actually need 30mm. You should do measurements to see how much you'd want it to stick out.
30 the maximum I can go? I found a 30 on ebay 100 bux for just two! Yikes..
#2203
Driver
Join Date: Nov 2008
Location: Vernon Hills, ILLINOIS
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I need help!! I got 19 x 8.5 +43 and 19 x 10.5 +28. What size tires should I go with for the rears? I know for sure I need to roll the fenders. I'm thinking of going with 245/35/19 but it might be too stretched. But, it seems like 265/30/19 would be the proper tire size for me. What do you guys think?????
#2204
Pole Position
Join Date: Apr 2006
Location: California
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Well when you're already going to be sticking out so much then it is... I guess it just depends on how much fender work you want to do. Yeah, you can make them fit.
Marcuse: 30mm will stick each wheel out over an inch. For the most part thats the largest spacer you'll see. 100 bucks for the pair sounds about right too, you might be able to find some for around 80.
Marcuse: 30mm will stick each wheel out over an inch. For the most part thats the largest spacer you'll see. 100 bucks for the pair sounds about right too, you might be able to find some for around 80.