Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#696
Lexus Champion
iTrader: (5)
ok i didn't read through all the 47 pages but quick question since i need new rear tires bad...right now i have some 255/40/17 and was wondering if 275 will fit a 17x10 on a lowered(tein springs and kyb adjustable shock) sc300 w/o rubbing the inside fender etc or should i just get 265 instead??..i have no clue what the offset are on the rims but it does have a 2 inch or so lip though if that helps....
#697
Maintenance Moderator
iTrader: (2)
ok i didn't read through all the 47 pages but quick question since i need new rear tires bad...right now i have some 255/40/17 and was wondering if 275 will fit a 17x10 on a lowered(tein springs and kyb adjustable shock) sc300 w/o rubbing the inside fender etc or should i just get 265 instead??..i have no clue what the offset are on the rims but it does have a 2 inch or so lip though if that helps....
I have 275's on 9.5" wheels w/ +35 offset, I have rolled fenders, no rubbing...
#698
** i read like the first 6 pages but im tired and need to go to bed im lookin at wheels soon so here goes**
i jus bought a 94 sc300 and it is bone stock im wanting to lower it but i dont have much $$ i also have 4 michelin pilot tires 245-40-18s sittin at the house and am thinkin about buying some wheels since the car has some hideous 15x7 chrome american racing wheels that came on it.
i can get a set of 18x9.5 +20 wheels for 130$ a piece and since i already have the tires im thinkin bout going for it, but i cant afford coilovers infact im trying to find a good deal on springs but they dont seem to drop them much, unless u get the espilers can u use the supra struts and do supra lowering springs and get it dropped further?? also does anybody have any input on weather the 18x9.5 +20 will fit i can roll them a lil bit but not really wanting to pull it unless i really really have to...
has anybody ever used a stock supra spring and strut combo and cut a coil off the stock supra springs and threw it on lol?? this is a daily and i dont beat on it! i have another car for that.
and mongol khan did u ever have a Q? i think ive seen your car b4 i drive a camo nissan 240sx my buddy is doin a drift q45 with an rb25det anyways i thought your car looked familiar
i jus bought a 94 sc300 and it is bone stock im wanting to lower it but i dont have much $$ i also have 4 michelin pilot tires 245-40-18s sittin at the house and am thinkin about buying some wheels since the car has some hideous 15x7 chrome american racing wheels that came on it.
i can get a set of 18x9.5 +20 wheels for 130$ a piece and since i already have the tires im thinkin bout going for it, but i cant afford coilovers infact im trying to find a good deal on springs but they dont seem to drop them much, unless u get the espilers can u use the supra struts and do supra lowering springs and get it dropped further?? also does anybody have any input on weather the 18x9.5 +20 will fit i can roll them a lil bit but not really wanting to pull it unless i really really have to...
has anybody ever used a stock supra spring and strut combo and cut a coil off the stock supra springs and threw it on lol?? this is a daily and i dont beat on it! i have another car for that.
and mongol khan did u ever have a Q? i think ive seen your car b4 i drive a camo nissan 240sx my buddy is doin a drift q45 with an rb25det anyways i thought your car looked familiar
Last edited by sc300tim5; 11-20-06 at 10:57 PM.
#699
Maintenance Moderator
iTrader: (2)
** i read like the first 6 pages but im tired and need to go to bed im lookin at wheels soon so here goes**
i jus bought a 94 sc300 and it is bone stock im wanting to lower it but i dont have much $$ i also have 4 michelin pilot tires 245-40-18s sittin at the house and am thinkin about buying some wheels since the car has some hideous 15x7 chrome american racing wheels that came on it.
i can get a set of 18x9.5 +20 wheels for 130$ a piece and since i already have the tires im thinkin bout going for it, but i cant afford coilovers infact im trying to find a good deal on springs but they dont seem to drop them much, unless u get the espilers can u use the supra struts and do supra lowering springs and get it dropped further?? also does anybody have any input on weather the 18x9.5 +20 will fit i can roll them a lil bit but not really wanting to pull it unless i really really have to...
has anybody ever used a stock supra spring and strut combo and cut a coil off the stock supra springs and threw it on lol?? this is a daily and i dont beat on it! i have another car for that.
and mongol khan did u ever have a Q? i think ive seen your car b4 i drive a camo nissan 240sx my buddy is doin a drift q45 with an rb25det anyways i thought your car looked familiar
i jus bought a 94 sc300 and it is bone stock im wanting to lower it but i dont have much $$ i also have 4 michelin pilot tires 245-40-18s sittin at the house and am thinkin about buying some wheels since the car has some hideous 15x7 chrome american racing wheels that came on it.
i can get a set of 18x9.5 +20 wheels for 130$ a piece and since i already have the tires im thinkin bout going for it, but i cant afford coilovers infact im trying to find a good deal on springs but they dont seem to drop them much, unless u get the espilers can u use the supra struts and do supra lowering springs and get it dropped further?? also does anybody have any input on weather the 18x9.5 +20 will fit i can roll them a lil bit but not really wanting to pull it unless i really really have to...
has anybody ever used a stock supra spring and strut combo and cut a coil off the stock supra springs and threw it on lol?? this is a daily and i dont beat on it! i have another car for that.
and mongol khan did u ever have a Q? i think ive seen your car b4 i drive a camo nissan 240sx my buddy is doin a drift q45 with an rb25det anyways i thought your car looked familiar
mine is 1.1" drop on supra tt struts, and is perfect for me... you could do 1.5" drop on supra struts and be quite a bit lower than stock...
cutting coils off springs can be a good experience or horrible... depending on the spring rate and how much you cut off, you could end up with too stiff, too soft, or too springy... or just right... it depends...
#700
that offset will work with a narrow tire... proper fitment should be in the +35 to +45 range, and allow you to run a wider tire... what size do you have already?
mine is 1.1" drop on supra tt struts, and is perfect for me... you could do 1.5" drop on supra struts and be quite a bit lower than stock...
cutting coils off springs can be a good experience or horrible... depending on the spring rate and how much you cut off, you could end up with too stiff, too soft, or too springy... or just right... it depends...
mine is 1.1" drop on supra tt struts, and is perfect for me... you could do 1.5" drop on supra struts and be quite a bit lower than stock...
cutting coils off springs can be a good experience or horrible... depending on the spring rate and how much you cut off, you could end up with too stiff, too soft, or too springy... or just right... it depends...
i have 245/40/18 michlein pilots... i wish i had like 235s or a 35 series but ya thats my size im not sure exactly what u mean with the supra struts and drop and what not? doesnt the stock supra springs and struts drop it or is that what u were saying when i said 1.1in ??
Last edited by sc300tim5; 11-21-06 at 11:45 AM. Reason: spelling...
#701
Maintenance Moderator
iTrader: (2)
i have 245/40/18 michlein pilots... i wish i had like 235s or a 35 series but ya thats my size im not sure exactly what u mean with the supra struts and drop and what not? doesnt the stock supra springs and struts drop it or is that what u were saying when i said 1.1in ??
stock supra stuff is about a half inch drop, and is pretty cheap to come by... add 1.1" drop springs (eibach, tein, etc) or 1.6" drop springs and your car is low...
I just measured my car and with the supra struts, and tein s-tech springs, I am perfectly at the tire height front and rear (25" fender height front, 25" tire height, 25.25" fender height rear, 25.6" tire height)
#702
so your rear wheels are tucking .35 in ?
yea i get what your saying id like to do the supra struts and lowering springs, so im guessing that the 1.6" drop is enough... when i look at the car i jus keep thinkin it will need at least 2" to look good.... idk anyways thanks for the help ill find out this week i guess if im gonna get those wheels or not ill post some pics up if i do... but i need to get suspension at the same time also and roll the fenders.
yea i get what your saying id like to do the supra struts and lowering springs, so im guessing that the 1.6" drop is enough... when i look at the car i jus keep thinkin it will need at least 2" to look good.... idk anyways thanks for the help ill find out this week i guess if im gonna get those wheels or not ill post some pics up if i do... but i need to get suspension at the same time also and roll the fenders.
#703
Maintenance Moderator
iTrader: (2)
so your rear wheels are tucking .35 in ?
yea i get what your saying id like to do the supra struts and lowering springs, so im guessing that the 1.6" drop is enough... when i look at the car i jus keep thinkin it will need at least 2" to look good.... idk anyways thanks for the help ill find out this week i guess if im gonna get those wheels or not ill post some pics up if i do... but i need to get suspension at the same time also and roll the fenders.
yea i get what your saying id like to do the supra struts and lowering springs, so im guessing that the 1.6" drop is enough... when i look at the car i jus keep thinkin it will need at least 2" to look good.... idk anyways thanks for the help ill find out this week i guess if im gonna get those wheels or not ill post some pics up if i do... but i need to get suspension at the same time also and roll the fenders.
click on my signature picture for what it looks like...
#704
im guessin ill have to add a little more - camber or maybe from being lowered it will have enough? idk im fixing to jus get the wheels mount the tires and try and get some suspension and find out!
#705
Maintenance Moderator
iTrader: (2)
lol ya i just did that a bit earlier and im suprised that 1.6 inches did that! thats awsome now if i can get those wheels to fit nicely with some fender rolling that will be awsome! my friend should be gettin his fender roller in soon!
im guessin ill have to add a little more - camber or maybe from being lowered it will have enough? idk im fixing to jus get the wheels mount the tires and try and get some suspension and find out!
im guessin ill have to add a little more - camber or maybe from being lowered it will have enough? idk im fixing to jus get the wheels mount the tires and try and get some suspension and find out!