1jz gte ignition problem
Thread Starter
Pole Position
Joined: Jan 2002
Posts: 269
Likes: 7
From: Krakow, Poland
1jz gte ignition problem
have problem with ignition on 1jz gte after swap
first: there is 14 code error
sedond: there is spark on 1,3,5 cylinger. NO spark on 2,4,6....
strange
engine go not start. fuel is present.
btw I have 78 code (fuel pump asociated but fuel pump run, I made fuel pump ecu bypass.)
please help.
thanks
Jerry
first: there is 14 code error
sedond: there is spark on 1,3,5 cylinger. NO spark on 2,4,6....
strange
engine go not start. fuel is present.
btw I have 78 code (fuel pump asociated but fuel pump run, I made fuel pump ecu bypass.)
please help.
thanks
Jerry
Thread Starter
Pole Position
Joined: Jan 2002
Posts: 269
Likes: 7
From: Krakow, Poland
code 78 solved
still 14 code error
car cranking and try start but can not (probably ignite for 3 cylinders). any suggestions?
where I can find ignition schematic and diagnostic procedure for 1jz gte or 2 jz gte?
still 14 code error
car cranking and try start but can not (probably ignite for 3 cylinders). any suggestions?
where I can find ignition schematic and diagnostic procedure for 1jz gte or 2 jz gte?
Driver School Candidate
Joined: Apr 2013
Posts: 1
Likes: 0
From: Ks
Did anybody ever answered this or can anybody help. I got the same problem on my is300 1jzgte I got spark on cylinder 1 3 5. No spark on cylinder 2 4 6.. Any suggestions ?? Could it be a bad igniter I got a used one fro eBay so I gues it could be it:-/
Thread
Thread Starter
Forum
Replies
Last Post
ttsleeper
SC - 1st Gen (1992-2000)
12
Apr 11, 2007 10:56 PM
