DIY for access to lights?
Thread Starter
Pole Position
Joined: May 2010
Posts: 334
Likes: 3
From: FL
DIY for access to lights?
Is there a DIY thread anywhere (video preferred) of how to access all the lights? Basically just need to know how to pop off these lens covers without breaking anything.
For a 2010 RX 350
For a 2010 RX 350
No, I don't play soccer!
Joined: Jul 2009
Posts: 6,652
Likes: 177
From: NJ
The lens covers are held in by tabs. Some people used a thin screwdriver, I opted for a thin flexible plastic card from a store to displace the pressure and lessen the likelihood of breaking them. Slide the card in and move around to release the tabs. Nobody has broken a lens as far as I know. The doors are easiest, rear dome the worst.
Here is a great thread with lots of information on interior and exterior bulbs and a little information on installation:
https://www.clublexus.com/forums/rx-...white-led.html
Here is a great thread with lots of information on interior and exterior bulbs and a little information on installation:
https://www.clublexus.com/forums/rx-...white-led.html
Thread Starter
Pole Position
Joined: May 2010
Posts: 334
Likes: 3
From: FL
The lens covers are held in by tabs. Some people used a thin screwdriver, I opted for a thin flexible plastic card from a store to displace the pressure and lessen the likelihood of breaking them. Slide the card in and move around to release the tabs. Nobody has broken a lens as far as I know. The doors are easiest, rear dome the worst.
Here is a great thread with lots of information on interior and exterior bulbs and a little information on installation:
https://www.clublexus.com/forums/rx-...white-led.html
Here is a great thread with lots of information on interior and exterior bulbs and a little information on installation:
https://www.clublexus.com/forums/rx-...white-led.html
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
