RX300 Electrical Connector List
Thread Starter
Pole Position
Joined: Sep 2012
Posts: 338
Likes: 16
From: Oregon
RX300 Electrical Connector List
I have the wiring diagrams for my 1999 RX300 but no information about the connectors.
From the wiring diagram I can figure out the wire color and pin number I want to probe but not where the connectors are located.
Does anyone have this info or a link to where I can find it?
Thanks in advance.
UPDATE: I found the connector information that I was looking for. I also discovered that there are some schematics that have a major error in them. If anyone is looking at the connectors that go into the ECU, the schematic that labels those connectors E5, E6, E7, E8 and E9 is wrong! They should be labeled E6, E7, E8, E9, and E10.
From the wiring diagram I can figure out the wire color and pin number I want to probe but not where the connectors are located.
Does anyone have this info or a link to where I can find it?
Thanks in advance.
UPDATE: I found the connector information that I was looking for. I also discovered that there are some schematics that have a major error in them. If anyone is looking at the connectors that go into the ECU, the schematic that labels those connectors E5, E6, E7, E8 and E9 is wrong! They should be labeled E6, E7, E8, E9, and E10.
Last edited by Baetke; Oct 26, 2016 at 02:52 PM.
Driver School Candidate
Joined: Dec 2018
Posts: 8
Likes: 0
From: California
I have the wiring diagrams for my 1999 RX300 but no information about the connectors.
From the wiring diagram I can figure out the wire color and pin number I want to probe but not where the connectors are located.
Does anyone have this info or a link to where I can find it?
Thanks in advance.
UPDATE: I found the connector information that I was looking for. I also discovered that there are some schematics that have a major error in them. If anyone is looking at the connectors that go into the ECU, the schematic that labels those connectors E5, E6, E7, E8 and E9 is wrong! They should be labeled E6, E7, E8, E9, and E10.
From the wiring diagram I can figure out the wire color and pin number I want to probe but not where the connectors are located.
Does anyone have this info or a link to where I can find it?
Thanks in advance.
UPDATE: I found the connector information that I was looking for. I also discovered that there are some schematics that have a major error in them. If anyone is looking at the connectors that go into the ECU, the schematic that labels those connectors E5, E6, E7, E8 and E9 is wrong! They should be labeled E6, E7, E8, E9, and E10.
Thread
Thread Starter
Forum
Replies
Last Post
BJ Park
RX - 1st Gen (1999-2003)
2
Apr 24, 2006 07:31 PM