All of my fuses are ok, but my front fog lights, hazard lights and high beams all stopped functioning. I have several codes
P0300
P0301
P0303
P0305
P0125
P01135
P01155
P1130
P1133
P1155
P1153

Any ideas?

 

Well first of all code p0300, p0301, p0303 and p0305 are misfires in cylinders 1,3 and 5.. does the car shake or lack power off the line?

 

It stutters a little when accelerating from a stop intermittently. I bought the vehicle a few months ago and figure that the previous owner changed the spark plugs that were easy to get to and not the ones throwing the code.

 

I would try to pull the plugs and inspect them and see what brand they are, only denso or ngk iridium are recommended for this vehicle. That's the first place I would start, next could be your oil control valve or ocv for short.

 

+1 for anthony. If the previous owner only replaced the front plugs which are the easiest to get to; but did not do the rear plugs which sadly are a royal p.i.t.a. to get to; then i would say the rear plugs definitely need to be changed as that can definitely be a cause of studdering upon initial acceleration.