Foglight Day running lights
#1
Pole Position
Thread Starter
Foglight Day running lights
I found a easy simple way to be able to have your fog light running separate from the headlights to where you can run the fog lights running during the day like a whole bunch of people have been wanting to do with their rx300 I'll post some pictures below with the end results NOTE: I have aftermarket hid's for my headlights and fog lights
Last edited by AnthonyMtz; 05-30-14 at 10:49 PM. Reason: hid add on
#7
Pole Position
Thread Starter
Ok step one ***NOTE this will only work if you have the halogen Headlights only factory hid's exclude*** ok back to step one, unplug your headlights and fog light wiring harness
Trending Topics
#8
Pole Position
Thread Starter
Now connect the the Grey fog light wiring harness to the headlight bulb and get the headlight wiring harness and connect it to the fog light bulb and your done now the headlights switch inside will control the headlights and the fog lights little wheel switch will turn on the headlights
#9
Pole Position
Thread Starter
And this is your end results I have mine on all the time and when I need my headlights I just turn on the foglight switch it doesn't matter if the fogs are constantly on because when you lock the car "2 lock beeps" it automatically shuts them off sweet factory feature...anyways I hope I gave everyone a modification that was very hard to figure out but I cracked the secret lol so I hope everyone enjoys this and if anyone has questions feel free to ask me good luck and again thanks to everyone on here that has helped me with my rx300 and this is a small thanks to everyone good luck ~Anthony
#10
Pole Position
Thread Starter
My baby lol well you can see my other baby in the back peeking and photo bombing the lights look great if you guys do this mod please post pictures I would love to see good luck ~Anthony
#11
Moderator
It is only in HI-Beam mode that the fog lights are cutoff .... safety issue and in some places it is illegal ,,, that is why the manufacturers built the electrical switching this way.
Salim
Salim
#12
Pole Position
Thread Starter
I understand Salim i am working on a relay to shut off the fogs when high beams are on and still keep the headlights on.
#13
Moderator
Your picture in post 10 says it all ,,, you want to turn on fogs without turning on headlights.
Salim
#14
Pole Position
Thread Starter
#15
Moderator
I like it. Just wonder what the amperage draw would be on the relays. They may be the same, for all I know...