Side tubes
Thread Starter
Lexus Test Driver
Joined: Jul 2001
Posts: 969
Likes: 0
From: California
Side tubes
......... *%&@#*$^*(@# ok sorry...
Man, i checked out www.Delta4x4.com and i like there side steps. Its just very close to the car and fits really nice. But all month, i have been bugging and trying to get prices and details about them, but no response until recently.
They sent me a catalog and its really nice. It had the Rx3 dressed up with there rims and grills. Very very nice. Then finally i got a reply on email and they told me about prices.... And you guys think 350 for Manik side steps expensive... or those Cobra Bars are expensive also for 500 or something? Those damn Germans or Europeans want $850-1200 American Dollars for those side tubes that they have!!!!
thast Crazy.
heres there email reply
Hallo,
many thanks for your interes on our Lexus-parts.
Enclosed you can click to our following link, and
you can see the regarding parts and the price in Euro:
http://www.4x4styling.com/Cars/Toyota/Lex_E.htm
When you give the "Euro without austrian-custom"-price in
the "currence-calculator" (above in a blue ledge),
you can get the prices in all currences you need.
We have two different side-steps for the Lexus:
1) the part Nr. DE113937EL - diameter 76 mm, in stain-steel: US$ 868,--
2) the part Nr. DE114937EL - diameter 101mm,in stain-steel: US$ 1115,--
3) The freight-costs would be about US$ 50,--.
These are respective sets (for the left and the right-side) and have
included mounting kits with screws.
It will be stable fixed on the frame.
For further questions please don`t hesitate to contuct me.
In the meantime best regards from
i also checked out the currency converter and its that expensive... sigh i might have to just go with Maniks then... and i thought i was gonna be able to get those for a good price and just pay a bit for shipping....
anyways ya, thats my story... WHY do they have to charge so much... damn them... but yea...
btw, they have fenders also for sale and that exhaust setup which cost 900.... sigh o well
Man, i checked out www.Delta4x4.com and i like there side steps. Its just very close to the car and fits really nice. But all month, i have been bugging and trying to get prices and details about them, but no response until recently.
They sent me a catalog and its really nice. It had the Rx3 dressed up with there rims and grills. Very very nice. Then finally i got a reply on email and they told me about prices.... And you guys think 350 for Manik side steps expensive... or those Cobra Bars are expensive also for 500 or something? Those damn Germans or Europeans want $850-1200 American Dollars for those side tubes that they have!!!!
thast Crazy.
heres there email reply
Hallo,
many thanks for your interes on our Lexus-parts.
Enclosed you can click to our following link, and
you can see the regarding parts and the price in Euro:
http://www.4x4styling.com/Cars/Toyota/Lex_E.htm
When you give the "Euro without austrian-custom"-price in
the "currence-calculator" (above in a blue ledge),
you can get the prices in all currences you need.
We have two different side-steps for the Lexus:
1) the part Nr. DE113937EL - diameter 76 mm, in stain-steel: US$ 868,--
2) the part Nr. DE114937EL - diameter 101mm,in stain-steel: US$ 1115,--
3) The freight-costs would be about US$ 50,--.
These are respective sets (for the left and the right-side) and have
included mounting kits with screws.
It will be stable fixed on the frame.
For further questions please don`t hesitate to contuct me.
In the meantime best regards from
i also checked out the currency converter and its that expensive... sigh i might have to just go with Maniks then... and i thought i was gonna be able to get those for a good price and just pay a bit for shipping....
anyways ya, thats my story... WHY do they have to charge so much... damn them... but yea...
btw, they have fenders also for sale and that exhaust setup which cost 900.... sigh o well
Thread Starter
Lexus Test Driver
Joined: Jul 2001
Posts: 969
Likes: 0
From: California
ok, since i dont think i'll be paying 900 for sidesteps... i went and searched for the best price that i can find for Manik Side Steps - Polished Stainless steel.
I checked yahoo and it gave me a couple of websites... those peoples customer service SUCKS!! stupid guys... o well, the prices if ound was 350... 420... stuff like that.
DONT BOTHER WITH that price. The cheapest i found is 309.00 somethign cents.. i forgot. But i did not order it yet, cuz i'm still thinking about it. But thast very cheap for those Manik side steps in polished stainless steel. shipping would probably run about 25-40 dollars?
so what you guys can do is call 18007578669
they are called 75sunny or something.
http://www.75sunny.com/
there website
call and tell them part number "925754TSP"
Make sure is the polished stainless steel since the black powdered one is cheaper. But ya, just passing this along... i would prob order it sooner or later.
I checked yahoo and it gave me a couple of websites... those peoples customer service SUCKS!! stupid guys... o well, the prices if ound was 350... 420... stuff like that.
DONT BOTHER WITH that price. The cheapest i found is 309.00 somethign cents.. i forgot. But i did not order it yet, cuz i'm still thinking about it. But thast very cheap for those Manik side steps in polished stainless steel. shipping would probably run about 25-40 dollars?
so what you guys can do is call 18007578669
they are called 75sunny or something.
http://www.75sunny.com/
there website
call and tell them part number "925754TSP"
Make sure is the polished stainless steel since the black powdered one is cheaper. But ya, just passing this along... i would prob order it sooner or later.
RX 300 & 350Z Guru
Joined: Feb 2001
Posts: 3,256
Likes: 0
From: Georgia
I was at the Lexus dealer today and asked about the chrome "Back Country" brand side steps on an RX in the showroom. The look just like the Manik's and mount the front and rear of the bar with a HUGE bracket. It looks like drilling is a must for these too.
The parts department wanted about $450 for the set, not installed. HA! What IS Back Country anyway!?! I think I'd rather have the Manik's for less money. I think that may be my next mod too.
The parts department wanted about $450 for the set, not installed. HA! What IS Back Country anyway!?! I think I'd rather have the Manik's for less money. I think that may be my next mod too.
Pole Position
Joined: Dec 2001
Posts: 367
Likes: 0
From: TEXAS
spin, check some local shops. i got my maniks for 389$ installed =). i like doing most of the work myself, but for 40$ more then i found them online i let them install them hahaha. it is actually a lot of work....decent amont of drilling. even with the air tools and knowledge of installing them before, it took them an hour to install (2 guys). find them local!!!! save you a lot of work.
Thread
Thread Starter
Forum
Replies
Last Post
