When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Has anyone replaced the RC 350 puddle lights with an LED image? They seem to be in a different location than the other models, so I want to ensure that I get a projector that fits and hits the ground at the proper angle.
Has anyone replaced the RC 350 puddle lights with an LED image? They seem to be in a different location than the other models, so I want to ensure that I get a projector that fits and hits the ground at the proper angle.
I just got these for my RC F and they were a direct replacement for the OEM lights. Took 2 minutes to change and they look great. I'm assuming the RC 350 uses the same door lights.
Correct. But I have led's in mine now. The footwell and door/puddle
lights were incandesent factory but easily changed out to led's.
I like the looks of the projector type though.
Correct. But I have led's in mine now. The footwell and door/puddle
lights were incandesent factory but easily changed out to led's.
I like the looks of the projector type though.
I replaced mine also. It's a great little treat every time you open the door at night, and people love it, as it's fairly unusual.
It might be going more mainstream, however - a friend recently gave me a ride in his new Audi A5 (back when getting into a car with someone was not against state law), and he had the Audi 4 ring logo projected from his doors. I asked, and he said it was an option when he bought the car. (Maybe via Audi, maybe just a dealer thing.) The last time I looked, the logo projectors were available for almost every make.)
Finally, they are very inexpensive and directly replace the stock lights - the replacement for both doors took about five minutes, and I was going slow.
Highly recommended.
I replaced mine also. It's a great little treat every time you open the door at night, and people love it, as it's fairly unusual.
It might be going more mainstream, however - a friend recently gave me a ride in his new Audi A5 (back when getting into a car with someone was not against state law), and he had the Audi 4 ring logo projected from his doors. I asked, and he said it was an option when he bought the car. (Maybe via Audi, maybe just a dealer thing.) The last time I looked, the logo projectors were available for almost every make.)
Finally, they are very inexpensive and directly replace the stock lights - the replacement for both doors took about five minutes, and I was going slow.
Highly recommended.
Correct. But I have led's in mine now. The footwell and door/puddle
lights were incandesent factory but easily changed out to led's.
I like the looks of the projector type though.
Hmm... My GS has LEDs from the factory for puddle lights but it says that these are compatible with the '18 GS. Do you guys know if this is the case? I thought the factory LED puddle lights had a different connector?