Sweet Lexus RC at Tuner Evo Miami!!
The following users liked this post:
2017FSport (04-24-19)
#7
Wow, I love the color. Pretty sure my car is going to end up light blue at some point as well. Does anyone know what those small fin looking things are at the back of the rear wheel arches are? It almost looks like a tiny mud guard.
Trending Topics
#8
Driver School Candidate
#11
I can confirm the NIA rear slats fit all the other RC variants. These are the pieces on the bottom of the bumper which are considered part of the aero lip kit. A pic below for reference of my RC350 with the same rear slats: (Excuse her being a bit dirty )
Last edited by lexual_rc; 05-03-19 at 10:46 AM.
The following users liked this post:
an1m4l (05-04-19)
#12
I have seen those little guards by the upper tire on most RC-F's so I am just assuming its part of their rear bumper. Not sure if they have any function though. Also it looks like the RC-F rear bumper could be a direct replacement for any other RC variant just like the one featured here so the total cost of this conversion may just be a combination of a new bumper and paint. The owner would have to confirm if they wanted to share that information.
I can confirm the NIA rear slats fit all the other RC variants. These are the pieces on the bottom of the bumper which are considered part of the aero lip kit. A pic below for reference of my RC350 with the same rear slats: (Excuse her being a bit dirty )
I can confirm the NIA rear slats fit all the other RC variants. These are the pieces on the bottom of the bumper which are considered part of the aero lip kit. A pic below for reference of my RC350 with the same rear slats: (Excuse her being a bit dirty )
The following users liked this post:
lexual_rc (05-10-19)
#13
Former Sponsor
Thread Starter
car looks great!
the rear spats for the RC and RCF are diffuerent but as you can see from the blue one, the owner made the RC spats fit the RCF so its possible
#14
That little part is put on the RCF wheel wells for DOT legality. There's a law somwhere saying that the stock wheels cant stick out past the fender/body so lexus put that on to avoid a redesign. Our RX350 has a similar piece.
#15
Thats some awesome information, I'm glad it has a legal purpose at the very least. Do you or anyone else happen to know the part number for these little guys?