LED Turning Singnal for RC 350

Reply Subscribe

Thread Tools

Search this Thread

May 25, 2016 | 07:59 AM

#16

XenonDepot

Former Sponsor

iTrader: (11)

Joined: Sep 2004

Posts: 6,426

Likes: 41

From: Canada

We've tried lots of "canbus" LED bulbs, and they are simply not consistent. The nice thing about external resistors is that you do not add any additional heat to the LED bulbs (bad for LED, they work 100% of the time, and pretty simple to install.

Steve

May 27, 2016 | 09:32 PM

#17

SpeedRcr

Pole Position

Joined: Oct 2015

Posts: 215

Likes: 17

From: Ontario

Quote:

Originally Posted by tfischer

Speed:
I bought from ijdmtoy.com (August 2015).
The unit, their description, was:
"10-088 360-degee [sic] Extreme Bright 50W CREE High Power 906 912 921 W16W T10 LED Back Up Reverse Light Bulbs, Parking Lights."
The cost was about $30.00.

Thank you very much!

Jun 17, 2016 | 11:18 AM

#18

Dimitri

Driver

iTrader: (2)

Joined: Nov 2010

Posts: 191

Likes: 3

From: NJ

does anyone have a link to where to get these?

I did 921 led reverse lights and they didn't require a resister. I assume the turn signals do?

Jun 17, 2016 | 01:22 PM

#19

XenonDepot

Former Sponsor

iTrader: (11)

Joined: Sep 2004

Posts: 6,426

Likes: 41

From: Canada

Turn-signal LED replacement bulbs typically always require load resistors.

Steve

Dec 13, 2017 | 07:16 PM

#20

Dimitri

Driver

iTrader: (2)

Joined: Nov 2010

Posts: 191

Likes: 3

From: NJ

Quote:

Originally Posted by rcJten

I bought these with great hopes for not needing an external resistor.
http://store.ijdmtoy.com/No-Resistor...0-02x-cree.htm

Installed in the rear first, they are very bright and no hyper-flash. I was super happy...until. I installed the first front flasher, and went to check its functionality, and they hyper-flashed. For the price I'm really disappointed. It seems that the lights resistance is slightly less than that of factory bulbs, so you can get away with replacing one. But replace all and they are a no go.

I really like the way these look in the headlights. It looks like a third tiny projector lens, matching the low and high projectors. I have ordered a set of these to install in the rear, in the hopes of eliminating the hyper-flash.
http://store.ijdmtoy.com/No-Hyper-Fl...s-p/20-001.htm

has anyone found these to work for the front yet?

i have them in my 17' civic and love them. I need them for mt rc now

pretty sure rear is 7440 and front is 7443 so it causes issue