Lexus logo
#1
Pole Position
Thread Starter
Join Date: May 2001
Location: ca
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Lexus logo
I did a search and it seems like a few people already had this emailed to them, but its not posted on the site. If someone could email me it, I would greatly appreciate it (I mainly need the 'L' with a circle around it).
fierceconcepts@aol.com
(illustrator, pc format is preferred)
Thanks
fierceconcepts@aol.com
(illustrator, pc format is preferred)
Thanks
#3
Pole Position
Thread Starter
Join Date: May 2001
Location: ca
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
I would need to enlarge that by alot, and by using that method it would come out all pixely...but I guess If thats the best that I get, ill have to work with it. Hopefully someone could send me one designed in illustrator or at least a much bigger version of it. I appreciate your post though.
thanks.
thanks.
#4
Lexus Champion
Here ya go, I just made this in Illustrator, so it's not perfect. If you want a copy of the Illustrator version just let me know
ahhhh wait, got to make some changes, brb
ahhhh wait, got to make some changes, brb
Last edited by EGainer; 04-26-03 at 12:23 PM.
#5
Lexus Champion
sorry, here's the fixed one, I had to add 2 more curves...
oh and also, i will have the full "Club@exus" in a vector format in AI by monday if you want to wait... The lexus in "Club@exus" is the same as on the car, like with the connecting letters and all....
oh and also, i will have the full "Club@exus" in a vector format in AI by monday if you want to wait... The lexus in "Club@exus" is the same as on the car, like with the connecting letters and all....
Last edited by EGainer; 04-26-03 at 12:44 PM.
#6
Pole Position
Thread Starter
Join Date: May 2001
Location: ca
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
That looks great. Could you send me that in illustrator format?
my email is fierceconcepts@aol.com
So did you just use the ellipse tool to make the two circles, and the pen tool to plot the points for the 'L' (on a new layer over a non vector format of the image)? Howd you go about making the two gaps in the ellipse?
I thought there was a version of this floatin around..thanks for actually making it.
my email is fierceconcepts@aol.com
So did you just use the ellipse tool to make the two circles, and the pen tool to plot the points for the 'L' (on a new layer over a non vector format of the image)? Howd you go about making the two gaps in the ellipse?
I thought there was a version of this floatin around..thanks for actually making it.
#7
Lexus Champion
Used the Ellipse tool to make 2 ellipses, then pathfinder to subtract one from the other so there was hole in it (the logo can be filled with paint). Then I made two rectangles forming the L, then trimmed them outside the circle. I used ellipses to make the curves on the L and then combined the rectangles and the circles together. anyway, i mailed you the link. I have a different one already, its the one i used for my windshield banner. it's the entire "Club@exus" logo