IS200t tune
#1307
Lexus Champion
Thread Starter
PM me for details!!! Brand new Burger Tuning piggyback with Data cable (to increase boost)
#1308
Forum Administrator
iTrader: (2)
Sheddy, just wanted to post and thank you for all the great research and info you've posted on this topic!
The following 2 users liked this post by DaveGS4:
Sheddy (07-26-17),
WhyHateTho (04-12-18)
#1309
Lexus Champion
Thread Starter
#1310
Pole Position
your bms prototype i ended up with has been good. like it a lot. haven't tried it in stage two yet. the link you sent me has several links of it's own and i'm not sure which to use. i'd try it if i knew.
#1311
Lexus Champion
Thread Starter
JB4 Download instructions .
Once you're connected chose MAP 1 and under User Adjustment set Boost Fail Safe to the desired PSI over stock, then click save.
#1313
Lexus Champion
Thread Starter
The BMS still hasn't been officially released, but he was able to make a couple units so there's only a handful of these out. You are one of the few
#1314
#1315
#1316
Lexus Champion
Thread Starter
There are only 2 catalytic converters on our cars and they are both on the down pipe.
Last edited by Sheddy; 07-26-17 at 09:57 AM.
#1317
Pole Position
The secondary cats in which I'm referring to have a honeycomb material inside it just like the primary cats. A resonator has an open pathway with packing on the other side of perforated holes to absorb noise. When I have mine removed I will snap a pic of the inside...
#1318
Lexus Champion
Thread Starter
So you're referring to these as the secondary cats?
Has anyone removed these and took a picture of the inside? I thought these were resonators.
Has anyone removed these and took a picture of the inside? I thought these were resonators.
#1319
I paid $80 to have them removed because I thought the same. The kid just doesn't want to listen. I'm 100% certain these are completely hollow, free-flowing resonators
The following users liked this post:
Sheddy (07-26-17)
#1320