Review - Valve Body Upgrade
Originally Posted by jp430
Anyone know of a place here in SoCal that works with upgrading the VB??????? 

Only company i know of that does it would be
Turboeast, Toyomoto?, SRT, Peter Farrell Supercars, and maybe Boost-Logic
they are all out of state
Originally Posted by DoubleWhoosh
This is a good upgrade, as when a transmission is shifting, that is when you have the most wear. Very similar to slipping the clutch while shifting a manual. We've done a few with pretty good results, it also lowers the transmission operating temperature which is a VERY BIG
.
.
I thought you already knew we dont listen to you
Originally Posted by jp430
Anyone know of a place here in SoCal that works with upgrading the VB??????? 

XS Engineering in Huntington Beach can do it.
http://www.xs-engineering.com/
Also California Performance Transmissions in Huntington Beach.
http://www.cpttransmission.com/
Art the owner is in the Hot Rodding hall of fame
That is where I had mine done. I just left the whole car there for a couple of days
Very nice upgrade.
I have the 3.76 LSD and 2800 rpm TC and RMM SC and rarely hit the rev-limiter.
Shifts are really fast

Ivan
3dog
Thread Starter
Lexus Fanatic
iTrader: (13)
Joined: Jul 2003
Posts: 10,681
Likes: 9
From: Tulsa, Oklahoma
Originally Posted by 3dog
XS Engineering in Huntington Beach can do it.
http://www.xs-engineering.com/
Also California Hi Performance Transmissions in Huntington Beach.
http://www.cpttransmission.com/
That is where I had mine done. I just left the whole car there for a couple of days
Very nice upgrade.
I have the 3.76 LSD and 2800 rpm TC and RMM SC and rarely hit the rev-limiter.
Shifts are really fast

Ivan
3dog
http://www.xs-engineering.com/
Also California Hi Performance Transmissions in Huntington Beach.
http://www.cpttransmission.com/
That is where I had mine done. I just left the whole car there for a couple of days
Very nice upgrade.
I have the 3.76 LSD and 2800 rpm TC and RMM SC and rarely hit the rev-limiter.
Shifts are really fast

Ivan
3dog
Jonny
Originally Posted by Dx3
Damn man - nice upgrades. Now what kind of power are you making with that setup?
Jonny
Jonny
I was excited to see you got the VB upgrade. I love it the stock tranny just shifts so slow and gentle.
I got the VB upgrade at California Performance Transmissions and I think they charged me
$450 or $500 I'd have to look it up
I had the RMM SC installed at RMM in Huntington Beach. I bought it off another member here who bought it from them and had them take it off.
Then I took it over to XS Engineering in Huntington Beach where they install the S-AFAC2 and did the tuning. They said they could do the VB upgrade for $650. I had already made arrangements at Cal Perf Trans so I just let XS do the tuning. It is so cool all three of these places are within a few miles of each other.
Anyway you wanted some numbers.
I went with one of the conservative pulleys the 3.33.
I got a dyno of 360rwhp and 309lbs of torque.
This was at the end of April this year and I just love the power.
Of course I constantly keep my foot in it
My mom said what do you need a supercharger for ?
( I was staying with her while I was in California )
Well you don't need one unless you really feel the need to go 0-60 in 4.5 to 4.9 sec.
Which I feel Ithe need to do.

I love getting shoved back in the seat. It is the greatest feeling.

So Jonny when I you going to buy one. I've seen 2 for sale here recently?

Ivan
3dog
Thread Starter
Lexus Fanatic
iTrader: (13)
Joined: Jul 2003
Posts: 10,681
Likes: 9
From: Tulsa, Oklahoma
Originally Posted by 3dog
Hi Jonny
I was excited to see you got the VB upgrade. I love it the stock tranny just shifts so slow and gentle.
I got the VB upgrade at California Performance Transmissions and I think they charged me
$450 or $500 I'd have to look it up
I had the RMM SC installed at RMM in Huntington Beach. I bought it off another member here who bought it from them and had them take it off.
Then I took it over to XS Engineering in Huntington Beach where they install the S-AFAC2 and did the tuning. They said they could do the VB upgrade for $650. I had already made arrangements at Cal Perf Trans so I just let XS do the tuning. It is so cool all three of these places are within a few miles of each other.
Anyway you wanted some numbers.
I went with one of the conservative pulleys the 3.33.
I got a dyno of 360rwhp and 309lbs of torque.
This was at the end of April this year and I just love the power.
Of course I constantly keep my foot in it
My mom said what do you need a supercharger for ?
( I was staying with her while I was in California )
Well you don't need one unless you really feel the need to go 0-60 in 4.5 to 4.9 sec.
Which I feel Ithe need to do.

I love getting shoved back in the seat. It is the greatest feeling.

So Jonny when I you going to buy one. I've seen 2 for sale here recently?

Ivan
3dog
I was excited to see you got the VB upgrade. I love it the stock tranny just shifts so slow and gentle.
I got the VB upgrade at California Performance Transmissions and I think they charged me
$450 or $500 I'd have to look it up
I had the RMM SC installed at RMM in Huntington Beach. I bought it off another member here who bought it from them and had them take it off.
Then I took it over to XS Engineering in Huntington Beach where they install the S-AFAC2 and did the tuning. They said they could do the VB upgrade for $650. I had already made arrangements at Cal Perf Trans so I just let XS do the tuning. It is so cool all three of these places are within a few miles of each other.
Anyway you wanted some numbers.
I went with one of the conservative pulleys the 3.33.
I got a dyno of 360rwhp and 309lbs of torque.
This was at the end of April this year and I just love the power.
Of course I constantly keep my foot in it
My mom said what do you need a supercharger for ?
( I was staying with her while I was in California )
Well you don't need one unless you really feel the need to go 0-60 in 4.5 to 4.9 sec.
Which I feel Ithe need to do.

I love getting shoved back in the seat. It is the greatest feeling.

So Jonny when I you going to buy one. I've seen 2 for sale here recently?

Ivan
3dog
Hopefully soon I will be able to buy one if all goes well - but knowing my luck there won't be one available!!
Thx man,
Jonny
Originally Posted by 3dog
I got the VB upgrade at California Performance Transmissions and I think they charged me
$450 or $500 I'd have to look it up
Ivan, is that with remove/install included?
Originally Posted by mikal
Ivan, is that with remove/install included?
Call them up Andy and Art are the two guys to talk to.
Plan on leaving the car there for a couple of days. It really is a big improvement.
Ivan
Yeah, was that the price ($450-500) for the full job? Did they drop the valve body, do the upgrade and re-install it or did you have to bring them the valve body already dropped from the tranny. This is something I need to get done in the next month or so.
Thanks
Ken
Edit:: Lol, you just answered my questions in your post..
Thanks
Ken
Edit:: Lol, you just answered my questions in your post..
Thread Starter
Lexus Fanatic
iTrader: (13)
Joined: Jul 2003
Posts: 10,681
Likes: 9
From: Tulsa, Oklahoma
My guy pulled mine out, we shipped it out and had the upgrade shipped back. I supplied 5 quarts of Amsoil ATF and he put the new upgrade in. He charged me $150,
Jonny
Jonny









