SRT 0-60 vid
bmgs400
no exhaust only the SRT and ECU. I was nervous as could be, but followed the instructions for soldering the ECU and no CEL this far. I think I'm fine
DASHOCKER
windows all the way down
no exhaust only the SRT and ECU. I was nervous as could be, but followed the instructions for soldering the ECU and no CEL this far. I think I'm fine
DASHOCKER
windows all the way down
Originally Posted by STONER
bmgs400
no exhaust only the SRT and ECU. I was nervous as could be, but followed the instructions for soldering the ECU and no CEL this far. I think I'm fine
DASHOCKER
windows all the way down
no exhaust only the SRT and ECU. I was nervous as could be, but followed the instructions for soldering the ECU and no CEL this far. I think I'm fine
DASHOCKER
windows all the way down
Very impressive. I can't beleive that is just the intake... That thing is pretty loud though... From the start its very nice and than it opens up... I still can't beleive it.. nice vid
Tony
Tony
I'm not able to watch
so Stoner, does the car feel better mid to top, but softer on bottom?
You have requested the file DSCF0111.AVI (10449492 Bytes). This file has been downloaded 51 times already.
IMPORTANT: Download-accelerators are only supported with a PREMIUM-Account!
IMPORTANT: Download-accelerators are only supported with a PREMIUM-Account!
Stoner, I had to listen to it again man. It sounds incredible...Sounds like a mustang from the start then like a sports car
Maybe a mod in the future but i would be scared of splicing wires... Thanks
Tony
Maybe a mod in the future but i would be scared of splicing wires... ThanksTony
Originally Posted by tmf2004
Stoner, I had to listen to it again man. It sounds incredible...Sounds like a mustang from the start then like a sports car
Maybe a mod in the future but i would be scared of splicing wires... Thanks
Tony
Maybe a mod in the future but i would be scared of splicing wires... ThanksTony
Originally Posted by STONER
I had never soldered anything in my life before this and it was a piece of cake. I double and triple checked the location of the wires that I tapped in to, and that was the most important thing.
If you screww up can the ECU wires be fixed? I guess thats my question
Thanks stoner
Originally Posted by tmf2004
Thanks I'm sure the directions are pretty self explanatory
If you screww up can the ECU wires be fixed? I guess thats my question
Thanks stoner 
If you screww up can the ECU wires be fixed? I guess thats my question
Thanks stoner
I can hardly afford to be without my car for one day, and I tell you that the wiring portion of the install took a little over an hour. No big deal. My wife trying to pry me out of the car after the install... that's a different story.
Originally Posted by STONER
I dont think it would be that hard to repair the actual wires. My main concern was having something go wrong with the signals sent through the wires if wired incorrectly. The one wire that requires cutting can be repaired, but if you happened to tap the wrong one...
I can hardly afford to be without my car for one day, and I tell you that the wiring portion of the install took a little over an hour. No big deal. My wife trying to pry me out of the car after the install... that's a different story.
I can hardly afford to be without my car for one day, and I tell you that the wiring portion of the install took a little over an hour. No big deal. My wife trying to pry me out of the car after the install... that's a different story.

some women don't understand men and there cars...I try to explain to my GF about lowering and rims and she looks at me in a daze.... So i know what you mean.... Thanks for the reply and glad everything worked out for you...tony
i uploaded the vid for people who are having problems.....just right click>save as
http://videos.mr2pride.com/DSCF0111.AVI
enjoy
http://videos.mr2pride.com/DSCF0111.AVI
enjoy
Thread
Thread Starter
Forum
Replies
Last Post








