???Injen intake for GS400???
#1
Rookie
Thread Starter
Join Date: Mar 2003
Location: California
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
???Injen intake for GS400???
I want to get the Injen intake for its looks and good comments from other members, but all the sites I have visited state that the intake is for the GS430 and not the GS400. Is it still compatible with the GS400? Anybody have other suggestions. I plan on having a custom cold air box built by Bruce Nomura if that makes any difference. So is it compatible?
#2
Lexus Champion
They do not make one but the weird thing is that at the EOS meet they had a raffle for a Injen intake for your choice of Lexus and a GS400 was on the list. I was going to enter but remembered that there wasn't a kit for our cars... The winner did have a GS400 so maybe we'll see what he gets.
#4
Driver School Candidate
Join Date: Sep 2004
Location: Utah
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
if you look carefully in the picture above, looks like there are only 2 vacume hoses going into the intake, I just put K&N in my gs400, and i know for sure it had 3 vacume hoses for mind. Maybe that's the only different. I could be wrong though.
#5
Lexus Test Driver
Join Date: Sep 2003
Location: Florida
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Stage3
looks like they make one to me...
although that looks like GS430 Engine, i would assume it would be the same setup, considering that you dont have the ecu.
looks like they make one to me...
although that looks like GS430 Engine, i would assume it would be the same setup, considering that you dont have the ecu.
Trending Topics
#10
Lexus Test Driver
Join Date: Sep 2003
Location: Florida
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by svt5150
I hope they make one... I dont wanna shell out the $$$ for the SRT
I hope they make one... I dont wanna shell out the $$$ for the SRT
#11
Northern California Regional Officer
iTrader: (5)
Originally posted by svt5150
I hope they make one... I dont wanna shell out the $$$ for the SRT
I hope they make one... I dont wanna shell out the $$$ for the SRT
I'm just going by what DEE told me and he assured me it would fit.
That's why I posted it HERE: https://www.clublexus.com/forums/sho...5&pagenumber=2
#12
Rookie
Thread Starter
Join Date: Mar 2003
Location: California
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Well....let me pose this question. What other intakes are available? I know of K&N (not polished..unfortunately) and RS Akimoto (two piece, ugh!). Are there any others besides SRT (too much$$$)?
#13
Advanced
iTrader: (1)
No GS400 intake listed on the site....
http://www.injen.com/application_intakes.html
You could always e-mail them and see if any of the other models are compatible.
http://www.injen.com/application_intakes.html
You could always e-mail them and see if any of the other models are compatible.
#14
Lexus Test Driver
Join Date: Sep 2003
Location: California
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
I believe its the Mass Air Flow Sensor that is different between the 2 motors. one is more squarish and the other is roundish. Something of that nature. They only have it available for a 430 motor right now, not the 400. Someone earlier posted that injen doesn't list it on their site.