ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   SC - 1st Gen (1992-2000) (https://www.clublexus.com/forums/sc-1st-gen-1992-2000-6/)
-   -   Err Err Err code on replacement CD changer (https://www.clublexus.com/forums/sc-1st-gen-1992-2000/741645-err-err-err-code-on-replacement-cd-changer.html)

moretoys May 9, 2014 11:29 AM

Err Err Err code on replacement CD changer
 
Got a 92-96 ES300 6CD changer off ebay & installed. It is still throwing the Error code.
Is there a reset button? Is there a trick to sync it with the head unit?
Nakamichi head unit displays communication with unit in every way and unit makes all the right noises then goes to Err. Please help and thanks in advance.

Does the unit need to be grounded to work? I just tested it laying near the hole for the old one. Thanks

kilroy45 May 10, 2014 09:32 AM

cd changer
 
I have a cd changer from my 96. I put it in my 92 sc300. So I have the same one you have.
1st make sure the CDs are in correctly (Ive done this when I first used it)
2nd make sure the arrow on the CD cartridge face the arrow on the lid.
3rd with the lid open, feel at the bottom corner inside the lid (8 o clock position?) Its on side closest to tail lights and open portion of trunk its a small little black dot of a button (this is the rest button) I can send a pic of mine once Im home from car show if you need

moretoys May 10, 2014 08:38 PM


Originally Posted by kilroy45 (Post 8529615)
I have a cd changer from my 96. I put it in my 92 sc300. So I have the same one you have.
1st make sure the CDs are in correctly (Ive done this when I first used it)
2nd make sure the arrow on the CD cartridge face the arrow on the lid.
3rd with the lid open, feel at the bottom corner inside the lid (8 o clock position?) Its on side closest to tail lights and open portion of trunk its a small little black dot of a button (this is the rest button) I can send a pic of mine once Im home from car show if you need

No Kilroy you don't have the same one I have. Mine is the much talked about direct plug and play replacement of the 12 CD unit that came in the SC3 & SC4. I see no reset button on the ES 6CD changer,
Anyone else have any sugestions?

kilroy45 May 12, 2014 07:35 PM

Misread it as an SC cd changer sorry but I tried. And I don't think its much talked about...otherwise you could find it by searching forums instead . If its an es changer why not jump over there to ES section..

E36M3 May 17, 2014 08:39 PM

Kilroy, I'm getting the same error. Do you have a pic of the reset button. Thanks.

E36M3 May 17, 2014 09:49 PM

Update! I found the reset button. Pressed it but no avail. Is there a special method to reset it fot it to work? Appreciate the help!

kilroy45 May 20, 2014 02:13 PM

2 Attachment(s)
Attachment 329811

Attachment 329812

Originally Posted by e36m3 (Post 8541620)
kilroy, i'm getting the same error. Do you have a pic of the reset button. Thanks.


kilroy45 May 20, 2014 02:14 PM

Yes you have to open it up. And press and hold the button. It will reload all cds back to cartridge then it raises up

E36M3 May 26, 2014 08:30 AM


Originally Posted by kilroy45 (Post 8545716)
Yes you have to open it up. And press and hold the button. It will reload all cds back to cartridge then it raises up

I did exactly you said. Load the discs, error appeared, opened cd changer, pressed and held button but nothing happened. What am i doing wrong?

Luxor May 26, 2014 08:59 AM

Try using a regular CD rather than a burned CD-R disc. Maybe it can't read burned CDs.

E36M3 Jun 1, 2014 09:16 PM


Originally Posted by Luxor (Post 8553548)
Try using a regular CD rather than a burned CD-R disc. Maybe it can't read burned CDs.

I tried that too to no avail. I don't know what I'm doing wrong.

Sweatshop Jun 27, 2014 06:22 AM

Clean the lens. Clean the lens. Clean the lens. Four dollar disc with a lil brush on it. Pop it in and play it a few times. Works wonders.


All times are GMT -7. The time now is 07:18 AM.


© 2026 MH Sub I, LLC dba Internet Brands