Notices
SC - 1st Gen (1992-2000)

Car no power!!!! Helpp!!!!!!!!!!!

Thread Tools
 
Search this Thread
 
Old Nov 13, 2013 | 03:35 PM
  #1  
RuffinoJ's Avatar
RuffinoJ
Thread Starter
Driver School Candidate
 
Joined: Nov 2013
Posts: 2
Likes: 0
From: Illinois
Exclamation Car no power!!!! Helpp!!!!!!!!!!!

over the last couple months i have lost power to my car a couple times! you will be fine with power than nothing! i used to just wiggle the terminal on the positive side of battery and it would work! yesterday it wouldnt work so my grandpa came over and we got it to work! i drove it around all day today and i got a new terminal! i got home and switched the terminal and now i cant get power to the car no matter what i do! the battery is full charged and good! you check all the lines from the battery and they are good! all the fuses are good! but the car its self wont get power! the battery sense power to the fuse panel! how do i get power to my car when everything gets power internally but my car wont get power? from battery to starter theres power! from battery to fuse panel theres power! the fuses are good! any ideas why my car wont get power when everything else has power?
Reply
Old Nov 13, 2013 | 03:42 PM
  #2  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 36
From: NM
Default

Did you check the Alternator! Also check for adequate grounding! It doesn't hurt to get a couple extra grounding wires and ground them to the chassis/frame/engine block! GL! !!!!!
Reply
Old Nov 13, 2013 | 04:39 PM
  #3  
SCstone's Avatar
SCstone
Pole Position
 
Joined: Sep 2013
Posts: 233
Likes: 0
From: Tx/Co
Default

^^x2 alternator/grounding!!!

you have radio and stuff but when you start the car you have no power!?! something is loose or alternator/starter is going out! longshot but battery might need distiled water or not enough amps!
Reply
Old Nov 13, 2013 | 04:53 PM
  #4  
RuffinoJ's Avatar
RuffinoJ
Thread Starter
Driver School Candidate
 
Joined: Nov 2013
Posts: 2
Likes: 0
From: Illinois
Default

I have absolutely no power whats so ever. The altenator was just replaced not to long ago.
How do i check the grouding?
Reply
Old Nov 14, 2013 | 07:33 AM
  #5  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 36
From: NM
Default

There should be a ground from the battery terminal to the engine block/chassis/frame. Wouldnt hurt to grab another ground from the block to the batt. Worst comes to worse, the starter siezed...?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
harold2011
ES - 1st to 6th Gen (1990-2018)
5
Sep 8, 2017 10:54 AM
UGAALF
SC430 - 2nd Gen (2001-2010)
10
Dec 4, 2015 01:20 PM
sgmstr
GS - 4th Gen (2013-2020)
3
Jan 10, 2014 06:38 PM
Teahupoo
IS - 1st Gen (2001-2005)
3
Dec 18, 2011 06:55 AM
DB S600
LX - 1st and 2nd Gen (1996-2007)
2
Sep 4, 2004 03:19 PM




All times are GMT -7. The time now is 09:10 AM.