Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

First SC300 Experience

Thread Tools
 
Search this Thread
 
Old 04-24-12, 05:52 AM
  #1  
Chris1980
Driver School Candidate
Thread Starter
 
Chris1980's Avatar
 
Join Date: Apr 2012
Location: FL
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default First SC300 Experience

Hello everyone,

This is my first post as a Lexus Club member, so forgive me if I sound ignorant about my experience. First off, this is my first Toyota/Lexus ever. I purchased a 96 SC300 with 164k miles and at first I had to say I was a bit skeptical buying a car with so many miles, but I bought it anyways?? At first I was looking for a sports car that looks good and could be a “project car”. But after purchasing this car I really fell in love with it and became sort of compulsive with the type of upgrades/mods you can do to this car. With this said this is my reason for this post… I am so confused and anxious to do something to this car. Here are a few of my project thoughts (just not sure what order to do them in??)

Note: I don’t think I will be adding a Turbo??—Still thinking about it though?

1) Exhaust: I want upgrade the exhaust system, mainly because there is a rattle that comes from it. I am not the most mechanically incline person but it is embarrassing pulling up next to someone and you **** is rattling!! I got a quote for $450-600 to replace it with a cat back exhaust (using Magnaflow mufflers)—is this a deal or should I go elsewhere?

2) Intake/Headers: I can’t find any intakes under 200.00 and almost non-existing when it comes to the headers? Is there a manufacture that makes headers for this car?
These are the main points that I am focusing on write now. Can someone please point me in the right direction—I am so confused on what to do first!?!


Chris.
Old 04-24-12, 08:12 AM
  #2  
MooJohn
Lead Lap
 
MooJohn's Avatar
 
Join Date: May 2011
Location: GA
Posts: 485
Likes: 0
Received 2 Likes on 2 Posts
Default

Exhaust pipes don't rattle by themselves. It's probably a heat shield, so get under there and find which one it is and pry it away from the pipe. Problem solved, zero $$.

Without adding a turbo I don't know if you're going to get much more power out of the 3.0. You can find kits for around $2k that include everything it takes to go boosted: turbo, manifold, downpipe, FMIC, etc. Otherwise you can make it louder but you won't be going much faster.
Old 04-24-12, 02:11 PM
  #3  
Chris1980
Driver School Candidate
Thread Starter
 
Chris1980's Avatar
 
Join Date: Apr 2012
Location: FL
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks! this thing really drives me nuts! I will check it out this weekend. Also, I'm not opposed to turbo, just not too familiar with the whole set up??
Old 04-24-12, 06:00 PM
  #4  
Vh_Supra26
Lexus Fanatic
iTrader: (1)
 
Vh_Supra26's Avatar
 
Join Date: Jun 2008
Location: LA
Posts: 5,037
Likes: 0
Received 2 Likes on 2 Posts
Default

Have you thought about swaping in a 2JZ-GTE?
Old 04-24-12, 06:22 PM
  #5  
jayhoffa50
Rookie
 
jayhoffa50's Avatar
 
Join Date: Feb 2012
Location: maine
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Default

welcome to the club playboy !! im kinda new here myself but ive learned a lot bout my sc4 when i join .. welcome
Old 04-25-12, 11:12 PM
  #6  
g4ebguy90
Lead Lap
 
g4ebguy90's Avatar
 
Join Date: Feb 2012
Location: IL
Posts: 442
Likes: 0
Received 2 Likes on 2 Posts
Default

With the money you could spend NA, around 1k or so and make 20hp, you could spend 2k and make like 150hp more
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DSKLexus
SC- 1st Gen (1992-2000)
11
05-04-15 08:18 PM
Chris1980
Car Chat
6
04-24-12 11:00 PM
Fireblaze
SC- 1st Gen (1992-2000)
45
04-24-07 03:56 AM
maxfli555
SC- 1st Gen (1992-2000)
8
05-23-05 03:23 PM



Quick Reply: First SC300 Experience



All times are GMT -7. The time now is 07:14 PM.