No Code But no power
#1
Driver
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Location: Wa
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
No Code But no power
I am having an odd issue and usually I would take a look and see what the code is and resolve it but no code or check engine light.
Overall
I start the car it idles fine no odd noises everything seems fine, it has just had a tune up (new plugs, wires, distributor, cap, rotor, fanbelt and new o2's within 1k miles) since this issue started and timing is spot on.
I back the car up and its fine, when i put it in gear i have no power to go forward. I checked under the car and there are no leaks, Checked the fluid levels and all perfect and the oil and coolant are both clean
Any Ideas What this could be?
Overall
I start the car it idles fine no odd noises everything seems fine, it has just had a tune up (new plugs, wires, distributor, cap, rotor, fanbelt and new o2's within 1k miles) since this issue started and timing is spot on.
I back the car up and its fine, when i put it in gear i have no power to go forward. I checked under the car and there are no leaks, Checked the fluid levels and all perfect and the oil and coolant are both clean
Any Ideas What this could be?
#3
Driver
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Location: Wa
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Before it had a bad valve cover gasket so there was some oil on the top of the plug but nothing on the electrode area, but now the plugs are perfect and clean.There is no misfire so im starting to think it could be a fuel issue since its fine at idle but not under load but there is still the oddity that reverse is fine.
Thread
Thread Starter
Forum
Replies
Last Post