Biggu

iTrader: (12)

turbo housing is worth more than the exhaust which needs modified anyway. Im going to bring the hot side to my machinist and have him whip me up a new Vband that will work with my turbo and can be welded to the downpipe with out any issues.

TURBO819

iTrader: (5)

3" VS 3.5" Exhaust

Link.
http://www.modified.com/tech/modp-11...ech/index.html

plex

iTrader: (11)

^^^^Great article.

stockhatch

iTrader: (12)

Good read. Even so, going to duals reduces the need for such huge piping. I bet 3.5" DP/MP to 2.5" duals would work just as well as 3.5 all the way out.

TURBO819

iTrader: (5)

I got the Downpipe to fit by adding a 2.5" section.

TURBO819

iTrader: (5)

Replica Boost Logic 4 Inch Downpipe & Midpipe Test Fit.

TURBO819

iTrader: (5)

Replica Boost Logic 4 Inch Downpipe & Midpipe.


OBX Universal High Flow Resonator Pipe (4" to 4" x 26.50") Long. I removed 2" off of each of the ends and had a 4" V-Band added to one end and a 4" to 3" Stainless Steel Reducer which was connected to a Transition Y-pipe 3" Inlet & Duel Outlet


About 5" was removed from the MidPipe and a 4" V-band was added.



Replica Boost Logic 4 Inch Downpipe & Midpipe.


OBX Universal High Flow Resonator Pipe (4" to 4" x 26.50") Long. I removed 2" off of each of the ends and had a 4" V-Band added to one end and a 4" to 3" Stainless Steel Reducer which was connected to a Transition Y-pipe 3" Inlet & Duel Outlet


About 5" was removed from the MidPipe and a 4" V-band was added.


Before 5" was removed. See rear section of Mid Pipe


MidPipe & Resonator & Y-Pipe



Plans for the rest of the Exhaust. Just waiting for shipment of 5' of 3" Stainless Steel.

TURBO819

iTrader: (5)

Exhaust Parts.







MAGNAFLOW 14834 Race Series MUFFLERS.






Exhaust Clip. http://www.youtube.com/watch?v=wOVNP..._order&list=UL

99SC42

iTrader: (44)

Looks and sounds great .. when are you doing mine lol call me when you get a chance.