soarer 1jzgte goal 300rwhp
#1
Driver School Candidate
Thread Starter
Join Date: May 2010
Location: ca
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
soarer 1jzgte goal 300rwhp
i just recently got a 1995 soarer gt-tt/automatic w/BBS/rs 17x8.5&9.5 tein coil overs street . my goal is 350rwhp
i went shoping for parts and this is what i got[LIST=1]
3 inch exhaust
manual boost controller
mines ecu -no sld/ fcd
will put all this stuff on.
what else would i need.
is 350 rwhp to high for this
thanks
i went shoping for parts and this is what i got[LIST=1]
- 255lph pump
- fuel reg
- 440 injectors
- K&n cone air cleaner
- single turbo manifold
- 50mm waste gate
- 60a.r turbo
- 90mm throtle body
- aluminum plenum
- 3in intercooler
- 3inch piping
- aem fic
3 inch exhaust
manual boost controller
mines ecu -no sld/ fcd
will put all this stuff on.
what else would i need.
is 350 rwhp to high for this
thanks
#2
Lead Lap
iTrader: (1)
Join Date: Dec 2007
Location: Maryland
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
my stock 1jz with intake filter and exhaust with downpipe no boost controler made 336rwhp on a dyno...
stock intake manifold and throttle body is more then enough for 500rwhp leave it alone 90mm isnt needed and a waste of money for 350hp!!!
.60 ar compressor is way way way to small stop looking at ebay turbos. and get something like a 61mm turbo with .6x on the exhaust housing.
350 can be done with stock twins FYI
stock intake manifold and throttle body is more then enough for 500rwhp leave it alone 90mm isnt needed and a waste of money for 350hp!!!
.60 ar compressor is way way way to small stop looking at ebay turbos. and get something like a 61mm turbo with .6x on the exhaust housing.
350 can be done with stock twins FYI
Last edited by Slow_Sc3; 05-14-10 at 06:54 AM.
#3
Lexus Champion
iTrader: (4)
my stock 1jz with intake filter and exhaust with downpipe no boost controler made 336rwhp on a dyno...
stock intake manifold and throttle body is more then enough for 500rwhp leave it alone 90mm isnt needed and a waste of money for 350hp!!!
.60 ar compressor is way way way to small stop looking at ebay turbos. and get something like a 61mm turbo with .6x on the exhaust housing.
350 can be done with stock twins FYI
stock intake manifold and throttle body is more then enough for 500rwhp leave it alone 90mm isnt needed and a waste of money for 350hp!!!
.60 ar compressor is way way way to small stop looking at ebay turbos. and get something like a 61mm turbo with .6x on the exhaust housing.
350 can be done with stock twins FYI
Thread
Thread Starter
Forum
Replies
Last Post
MKIVS374
SC400 / 300 Classifieds
5
05-16-10 08:16 PM