ashtray

iTrader: (12)

Updated Question

Is there a way to make 4 wire threaded o2 sensors from a 1997 SC300 fit into a header that has bolt on o2 sensor bungs? Thank you.
Will o2 sensors from a 1995 and older sc300 work with an OBDII ecu and plug from a 1997 and up o2 sensor? Thanks

yarthsA

edit: I realize they are bolt on o2 sensors..but will the plugs work? and will the ecu read it correctly and all that?

ashtray

iTrader: (12)

Some one please. This cant be that hard a question. I searched and nada.

1siksc

iTrader: (8)

Hi! Sry I should of checked this section earlier. It all depends on the number of wires the one you have on now is. When I was N/A i picked up 2 borg warner o2's from ebay dirt cheap Brand New and they had the same amount of wires running out of them.

ashtray

iTrader: (12)

So the dependent factors are the wires. I know the ones my car had(which i cant use with this new manifold) had 4 wires. I am assuming the 1995 SC300's have 2? Do they make 4 wire bolt on o2 sensors? Thanks for chiming in. Appreciate it.

yarthsa-

ashtray

iTrader: (12)

bump to see if anyone can have another look into this.

99SC42

iTrader: (44)

If you can plug it up it should work.

1siksc

iTrader: (8)

what manifold are you using? I am making this a link on my browser now sry for the late response again.

1siksc

iTrader: (8)

wait... manifold? you na-t? thats probably a screw in for wideband 02 and the stock goes on dp. I know the Borg Warner o2's I had were screw ins.

1siksc

iTrader: (8)

this work? http://cgi.ebay.com/ebaymotors/New-B...Q5fAccessories

ashtray

iTrader: (12)

All of this is in reference to NA. Not NA-T.

1siksc

iTrader: (8)

alright, whats the manifold look like?
If it looks like the old o2 it should work. if not this place sells the stock the cheapest. You just need to wire it together. http://www.rockauto.com/catalog/rafr...1187603k870692

Dx3

iTrader: (13)

FYI - I know the 96 SC300 had 2-wire O2 sensors and the 99 SC300 has 4-wire O2 sensors...

Jonny

ashtray

iTrader: (12)

Mine are four...im sure the ones im getting are 2.

vangb2

iTrader: (2)

4 Wires are typically in this order:
Black wire- Ground for Heater
Black wire- Ground for body
Red wire- Heater (B+)
White wire- signal wire (0-1v only)

ashtray

iTrader: (12)

bump! updated question in first post.