hi-comp na-t build thread?.....well so far thats the plan.
#1
Rookie
Thread Starter
Join Date: Oct 2008
Location: hawaii
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
fast spool na-t build thread?.....well so far thats the plan.
OK so I ended picking up a stock 5 speed 92 sc300... the exterior is almost perfect! Aside from the rub on the front bumper theres no scraches or dents! Its kinda wierd going from a auto that makes 460hp/530tq to this. lol well here it is!
The interior needs some love. the steering wheel is all hash and the right door handle and window reg. are broken.
So far mods are h.i.d's,greddy shift **** (not done by me)
Future plans are...... tein flex coilovers(hopefully),havent decided on rims yet,origin roof wing,I already have a spoiler like fenderrubs, a lip kit AND
Last but not least na-t. Im thinking of a mhg,to4z,quickspool valve,log style exaust manifold,intercooler,close to stock size mhg,and supporting mods(bc,fuel up grades,stand alone,ect.
Well thats the plan.... lmk what you guys think of the na-t set up.
The interior needs some love. the steering wheel is all hash and the right door handle and window reg. are broken.
So far mods are h.i.d's,greddy shift **** (not done by me)
Future plans are...... tein flex coilovers(hopefully),havent decided on rims yet,origin roof wing,I already have a spoiler like fenderrubs, a lip kit AND
Last but not least na-t. Im thinking of a mhg,to4z,quickspool valve,log style exaust manifold,intercooler,close to stock size mhg,and supporting mods(bc,fuel up grades,stand alone,ect.
Well thats the plan.... lmk what you guys think of the na-t set up.
Last edited by turbo7m; 04-13-10 at 01:47 PM.
#2
Rookie
Thread Starter
Join Date: Oct 2008
Location: hawaii
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Progress! I was able to get ahold of some slightly used tein flexes! Ill be putting them on with tomorrow. Im stoked to be slammed. Now the search for wheels so I dont look so gay.
#3
Lexus Champion
iTrader: (10)
Car looks nice, good luck with the build. building a high compression na-t will be difficult. you will need a standalone to push high amounts of boost with stock compression and even then detonation will be knocking at your door (get it, knocking). use a TT headgasket and call it a day, its a trade off thats worth it in the end.
#4
Rookie
Thread Starter
Join Date: Oct 2008
Location: hawaii
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Ya Ive been thinking about it more and more and I could do without the high compression. Also thinking of going smaller to a to4s as well. That should make up for not having hi-compression.
#7
Rookie
Thread Starter
Join Date: Oct 2008
Location: hawaii
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
S.O.B! I ended up having to cut off the endlinks yesterday and already have new ones. Buuuutt then today i tried to take off the endlink mount and friggin ended up snapping both bolts on one side!! Right now I'm gonna say screw it and buy some supra lca's and new bolts. FML a couple hour job turned into a week job.
Trending Topics
#9
#11
Lexus Champion
iTrader: (10)
youre not supossed to take off that endlink mount bracket to the LCA. the reason why is its gauranteed to break if its the original part. at least thats what I was told.
they get rusty, they are huge, and the toyo techs do not ever take that part off.
I almost did the exact same thing cause my swar bar links were rusted on and I couldn't get them off. solution... took a grinder and grinded em off and pick up a spare set.
I got to give thanks to quickgs for warning me cause I was thinking of using my breaker bar on em. endlinks are drastically cheaper than the LCA, and might as well have new endlinks.
the right way to do it is to disconnect the sway bar links from the mount if you can (or cut them off), remove the strut mount bolt, pop the lower ball joint and you can swap out that arm. good luck
they get rusty, they are huge, and the toyo techs do not ever take that part off.
I almost did the exact same thing cause my swar bar links were rusted on and I couldn't get them off. solution... took a grinder and grinded em off and pick up a spare set.
I got to give thanks to quickgs for warning me cause I was thinking of using my breaker bar on em. endlinks are drastically cheaper than the LCA, and might as well have new endlinks.
the right way to do it is to disconnect the sway bar links from the mount if you can (or cut them off), remove the strut mount bolt, pop the lower ball joint and you can swap out that arm. good luck
#14
Rookie
Thread Starter
Join Date: Oct 2008
Location: hawaii
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
So I ended up cleaning up my room yesterday and pretty much found my fuel setup. fuel rail with 550's,gte impedence box, and two walbros..... Man my room was messy.
#15
Rookie
Thread Starter
Join Date: Oct 2008
Location: hawaii
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
So ive been looking for a log style manifold to no avail. If anyone comes across something like this phr one for N/A's lmk.
Last edited by turbo7m; 05-19-10 at 04:48 PM.