Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Anyone got a repair manual?

Thread Tools
 
Search this Thread
 
Old 12-07-09, 10:36 AM
  #1  
deviat
Driver School Candidate
Thread Starter
 
deviat's Avatar
 
Join Date: May 2009
Location: Ca
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default Anyone got a repair manual?

I need the recommended resistance readings for the coils. I can't drive to the store since it's running real bad, and it's raining too hard to walk. Anyone help me out here? THanks fellas. Coils, are already pulled, one is reading off. Need to know which is bad.
Old 12-07-09, 10:49 AM
  #2  
lexdud
Pole Position
 
lexdud's Avatar
 
Join Date: Feb 2008
Location: Fl
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by deviat
I need the recommended resistance readings for the coils. I can't drive to the store since it's running real bad, and it's raining too hard to walk. Anyone help me out here? THanks fellas. Coils, are already pulled, one is reading off. Need to know which is bad.

It would help if you told the forum what car (SC3 or 4) you have and what year it is.
Old 12-07-09, 10:55 AM
  #3  
deviat
Driver School Candidate
Thread Starter
 
deviat's Avatar
 
Join Date: May 2009
Location: Ca
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

1992 sc400
Old 12-07-09, 12:19 PM
  #4  
alanchad
Pole Position
iTrader: (1)
 
alanchad's Avatar
 
Join Date: May 2007
Location: Ga
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by deviat
I need the recommended resistance readings for the coils. I can't drive to the store since it's running real bad, and it's raining too hard to walk. Anyone help me out here? THanks fellas. Coils, are already pulled, one is reading off. Need to know which is bad.
Primary coil resistance between positive and negative terminals COLD
0.40 - 0.50

Secondary coil resistance between positive and high tension terminals COLD
10.0 - 14.0

Hope this helps,

Alan
Old 12-07-09, 01:20 PM
  #5  
deviat
Driver School Candidate
Thread Starter
 
deviat's Avatar
 
Join Date: May 2009
Location: Ca
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

of course if one of the primary windings was reading around 1.3-1.9 that would rule that as bad correct?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
masagsxr
SC- 1st Gen (1992-2000)
5
10-14-10 09:21 AM
JSC400
SC400 / 300 Classifieds
2
01-20-04 06:13 PM
bigdog1813
SC400 / 300 Classifieds
1
09-02-03 05:24 AM
Whitmanpc1
SC- 1st Gen (1992-2000)
2
03-23-02 04:38 PM



Quick Reply: Anyone got a repair manual?



All times are GMT -7. The time now is 05:26 PM.