Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Help with Aristo base map for Aem

Thread Tools
 
Search this Thread
 
Old 12-05-09, 04:17 PM
  #1  
F4A22
Pole Position
Thread Starter
iTrader: (14)
 
F4A22's Avatar
 
Join Date: Mar 2009
Location: Fl
Posts: 308
Likes: 0
Received 1 Like on 1 Post
Default Help with Aristo base map for Aem

Hoping someone can help with a basemap for a 91-93 Jdm aristo automatic swap for Aem.I searched all over thier forum and no dice.If anything some tips for the setup.Stock injectors i'm guessing 440's and stock twins.Thanks
Old 12-05-09, 05:32 PM
  #2  
fried_rice
Pole Position
iTrader: (20)
 
fried_rice's Avatar
 
Join Date: Oct 2007
Location: Houston, TX
Posts: 294
Likes: 0
Received 2 Likes on 2 Posts
Default

http://www.mapecu.com/
Support>base tables>Toyota

It will get you very close with a little fine tuning on WOT, driveablity, and idle; you'll be good.

I was just reading over my post and saw this. Sorry, lol... AEM, dumbass not map-ECU

Last edited by fried_rice; 02-02-10 at 10:30 PM.
Old 01-09-10, 04:14 PM
  #3  
F4A22
Pole Position
Thread Starter
iTrader: (14)
 
F4A22's Avatar
 
Join Date: Mar 2009
Location: Fl
Posts: 308
Likes: 0
Received 1 Like on 1 Post
Default

Still need help.A basemap would be great with shift controls already setup......
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vijayn
GS - 2nd Gen (1998-2005)
1
05-05-14 01:18 PM
1jzlover
GS - 1st Gen (1993-1997)
2
12-29-10 06:21 PM
KiPod
GS - 2nd Gen (1998-2005)
1
11-03-08 05:44 AM



Quick Reply: Help with Aristo base map for Aem



All times are GMT -7. The time now is 01:59 AM.